ASTORIA, NY —
OSHA Inspection: AXOS DESIGNS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AXOS DESIGNS INC. in 2635 1ST STREET, ASTORIA, NY 11102 (NAICS 337212). OSHA activity number 348235359.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AXOS DESIGNS INC.
- Site address
- 2635 1ST STREET
- City
- ASTORIA
- State
- NY
- ZIP
- 11102
- Mailing
- 2635 1ST STREET, ASTORIA, NY 11102
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337212
- Employees
- 20
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.133 A01
- Issued
- Oct 24, 2025
- Penalty
- Initial $2,837 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: On or about: May 6th 2025 Location: 2635 1st St, Astoria, NY 11102 a) Employee was exposed to eye impact while operating a pneumatic nail gun without eye protection.
Recent events (3)
- — J (S) $1400
- — C (S) $2837
- — Z (S) $2837
1910.213 C01
- Issued
- Oct 24, 2025
- Abate by
- Nov 17, 2025
- Penalty
- Initial $2,837 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about: May 6th 2025 Location: 2635 1st St, Astoria, NY 11102 a) Employees were exposed to hand injury when using a table saw to cut various sizes of wood without blade guard.
Recent events (3)
- — J (S) $1400
- — C (S) $2837
- — Z (S) $2837
1910.213 C03
- Issued
- Oct 24, 2025
- Penalty
- Initial $2,837 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: On or about: May 6th 2025 Location: 2635 1st St, Astoria, NY 11102 a) Employees were exposed to being struck by wood due to the use of a table saw without kickback finger.
Recent events (3)
- — J (S) $1400
- — C (S) $2837
- — Z (S) $2837
1910.305 G02 II
- Issued
- Oct 24, 2025
- Abate by
- Nov 20, 2025
- Penalty
- Initial $2,837 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: On or about: May 6th 2025 Location: 2635 1st St, Astoria, NY 11102 a) Employees were exposed to electric shock while using a spliced power cord with damaged outer insulating layer.
Recent events (3)
- — J (S) $1400
- — C (S) $2837
- — Z (S) $2837
1910.307 C03
- Issued
- Oct 24, 2025
- Abate by
- Nov 17, 2025
- Penalty
- Initial $4,965 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.307(c)(3): Equipment was not safe for the location in that it was not of a type and design that the employer demonstrated would provide protection from the hazards arising from the combustibility and flammability of vapors, liquids, gases, dusts, or fibers involved: On or about: May 6th 2025 Location: 2635 1st St, Astoria, NY 11102 a) Employees were exposed to fires, flash fires, deflagrations, and explosions due the use of electrical equipment that is not classified for combustible dust locations.
Recent events (3)
- — J (S) $2400
- — C (S) $4965
- — Z (S) $4965
More inspections at Axos Designs INC.
View Axos Designs INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337212)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348235359.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.