NATIONAL STOCK YARDS, IL —
OSHA Inspection: BAILY INTERNATIONAL, LLC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BAILY INTERNATIONAL, LLC. in 1122 ILLINOIS 3, NATIONAL STOCK YARDS, IL 62071 (NAICS 311412). OSHA activity number 348236894.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BAILY INTERNATIONAL, LLC.
- Site address
- 1122 ILLINOIS 3
- City
- NATIONAL STOCK YARDS
- State
- IL
- ZIP
- 62071
- Mailing
- 1122 ILLINOIS 3, NATIONAL STOCK YARDS, IL 62071
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311412
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Aug 7, 2025
- Abate by
- Sep 22, 2025
- Penalty
- Initial $11,823 · Current $8,276 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about April 25, 2025, the employer did not develop, document, and utilize procedures for the control of potentially hazardous energy for any equipment service or maintenance operations such as, but not limited to, cleaning operations on the Yutaka Wonton Wrapper Compound Roller, Model UT-100-C-R-882-J-6.
Recent events (2)
- — I (S) $8276
- — Z (S) $11823
1910.147 D
- Issued
- Aug 7, 2025
- Abate by
- Sep 22, 2025
- Penalty
- Initial $11,823 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On and before April 25, 2025, an employee was exposed to a vertical belt while cleaning dough below the production conveyor of a Yutaka Wonton Wrapper Compound Roller, Model UT-100-C-R-882-J-6. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the service work per the 1910.147(d)(2) requirements. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $11823
1910.147 C07 I A
- Issued
- Aug 7, 2025
- Abate by
- Sep 3, 2025
- Penalty
- Initial $11,823 · Current $8,276 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: On or about April 25, 2025, the employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees, and the knowledge and skills required to safely apply, use, and remove energy controls were acquired by employees conducting service and cleaning operations on the employers equipment such as, but not limited to, the Yutaka Wonton Wrapper Compound Roller, Model UT-100-C-R-882-J-6.
Recent events (2)
- — I (S) $8276
- — Z (S) $11823
1910.219 E03 I
- Issued
- Aug 7, 2025
- Penalty
- Initial $11,823 · Current $8,276 Reduced
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): On or about April 25, 2025, an employee made contact with a vertical belt on a Yutaka Wonton Wrapper Compound Roller, Model UT-100-C-R-882-J-6 that was not enclosed by a guard.
Recent events (2)
- — I (S) $8276
- — Z (S) $11823
More inspections in this industry (NAICS 311412)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348236894.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.