NAMPA, ID —
OSHA Inspection: FRESH AIR MANUFACTURING COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FRESH AIR MANUFACTURING COMPANY in 5450 EAST FRANKLIN ROAD UNIT 104, NAMPA, ID 83687 (NAICS 332312). OSHA activity number 348245580.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRESH AIR MANUFACTURING COMPANY
- Site address
- 5450 EAST FRANKLIN ROAD UNIT 104
- City
- NAMPA
- State
- ID
- ZIP
- 83687
- Mailing
- 5450 EAST FRANKLIN ROAD UNIT 104, NAMPA, ID 83687
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jul 15, 2025
- Penalty
- Initial $11,916 · Current $8,341 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) On January 21, 2025, employees used a Dreis & Krump press brake, Model 46-A, S/N L-9870-L, to bend short pieces of ? inch metal stock. Note: Certification of corrective action is required for this item.
Recent events (2)
- — I (S) $8341
- — Z (S) $11916
1910.303 B02
- Issued
- Jul 15, 2025
- Abate by
- Aug 8, 2025
- Penalty
- Initial $6,809 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a)On or about May 14, 2025, a fan was observed plugged into an extension cord which was plugged into a triple outlet extension cord, powered by a relocatable power drop. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $6809
1910.305 G01 IV A
- Issued
- Jul 15, 2025
- Abate by
- Aug 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A):Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a)On May 14, 2025, an orange extension cord was observed suspended from the ceiling to supply power to equipment in the work area. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 A02 X
- Issued
- Jul 15, 2025
- Abate by
- Aug 8, 2025
- Penalty
- Initial $6,809 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. a) On May 14, 2025, an extension cord in the work area was observed improperly suspended using zip ties. The method used places stress on the cord and does not provide adequate strain relief or mechanical protection. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $6809
1910.334 A02 II
- Issued
- Jul 15, 2025
- Abate by
- Aug 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii):There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the equipment safe were made: a) On May 14, 2025, an orange extension cord in the fabrication area was found in use with visible repairs made using electrical tape. This type of repair does not restore the cord to its original protective insulation properties and creates a risk of shock or fire. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections in this industry (NAICS 332312)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348245580.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.