ENID, OK —
OSHA Inspection: BRI-STEEL MANUFACTURING
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BRI-STEEL MANUFACTURING in 2215 SOUTH VAN BUREN STREET, ENID, OK 73703 (NAICS 331210). OSHA activity number 348247388.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Bri-Steel Manufacturing — free
Get an email when a new federal OSHA severe-injury report for Bri-Steel Manufacturing is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- BRI-STEEL MANUFACTURING
- Site address
- 2215 SOUTH VAN BUREN STREET
- City
- ENID
- State
- OK
- ZIP
- 73703
- Mailing
- 2215 SOUTH VAN BUREN STREET, ENID, OK 73703
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 54
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.333 A
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $14,895 · Current $6,852 Reduced
General-duty citation text
29 CFR 1910.333(a): Safety-related work practices were not employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work was performed near or on equipment or circuits which were or could be energized. On or about May 8, 2025, and at times prior, in the TPE Expander #1 machine area, safety-related work practices were not employed for employees performing work inside an energized TPE Expander control cabinet.
Recent events (2)
- — I (S) $6851.8
- — Z (S) $14895
1910.332 B01
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments. On or about May 8, 2025, and at times prior, in the TPE Expander #1 machine area, employees performing work inside of the TPE Expander control cabinet were not trained and familiar with safety-related work practices that pertained to their respective job assignments.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.333 A01
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $14,895 · Current $6,852 Reduced
General-duty citation text
29 CFR 1910.333(a)(1): Live parts to which an employee may be exposed were not deenergized before the employee works on or near them. On or about May 8, 2025, and at times prior, in the TPE Expander #1 machine area, employees performed work inside the TPE Expander control cabinet while its parts were not deenergized.
Recent events (2)
- — I (S) $6851.8
- — Z (S) $14895
1910.333 B02 IV B
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.333(b)(2)(iv)(B): Before circuits or equipment was worked as deenergized, a qualified person did not use test equipment to test the circuit elements and electrical parts of equipment to which employees would be exposed and did not verify that the circuit elements and equipment parts were deenergized. On or about May 8, 2025, and at times prior, in the TPE Expander #1 machine area, employees were allowed to perform work inside the TPE Expander control cabinet before its parts were tested and verified deenergized.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.333 B02 II A
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $14,895 · Current $6,852 Reduced
General-duty citation text
29 CFR 1910.333(b)(2)(ii)(A): Safe procedures for deenergizing circuits and equipment were not determined before circuits and equipment were deenergized. On or about May 8, 2025, and at times prior, in the TPE Expander #1 machine area, safe procedures for deenergizing the parts within the energized TPE Expander control cabinet were not determined before employees began performing work inside of the energized control cabinet.
Recent events (2)
- — I (S) $6851.8
- — Z (S) $14895
1910.333 B02 I
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.333(b)(2)(i): The employer did not maintain a written copy of the procedures outlined in paragraph (b)(2) of 29 CFR 1910.333 and did not make it available for inspection by the Assistant Secretary of Labor and his or her authorized representatives. On or about May 8, 2025, and at times prior there to, in the TPE Expander #1 machine area, a written copy of safe procedures for deenergizing the TPE Expander control cabinet was not provided to employees performing work inside of the energized cabinet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.333 B02 III A
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $14,895 · Current $6,852 Reduced
General-duty citation text
29 CFR 1910.333(b)(2)(iii)(A): A lock and a tag were not placed on each disconnecting means used to deenergize circuits and equipment on which work was to be performed. On or about May 8, 2025, and at times prior thereto, in the TPE Expander #1 machine area, each disconnecting means of the TPE Expander control cabinet employees were performing work inside of were not locked and tagged.
Recent events (2)
- — I (S) $6851.8
- — Z (S) $14895
1910.335 A01 I
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $14,895 · Current $6,852 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed. On or about May 8, 2025, and at times prior thereto, in the TPE Expander #1 machine area, protective equipment was not provided for employees performing work inside of the energized TPE Expander control cabinet.
Recent events (2)
- — I (O) $6851.8
- — Z (S) $14895
1910.335 A02 I
- Issued
- Nov 7, 2025
- Abate by
- Nov 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.335(a)(2)(i): When working near exposed energized conductors or circuit parts, each employee did not use insulated tools or handling equipment when the tools or handling equipment might have made contact with such conductors or parts: On or about May 8, 2025, and at times prior thereto, in the TPE Expander #1 machine area, insulated tools were not provided to employees performing work inside of an electrical cabinet containing (480 volt) live energized parts.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections in this industry (NAICS 331210)
Jul 10, 2026
Scot Industries, INC · MUSCODA, WI
Jul 7, 2026
Farwest Steel Corporation · BOISE, ID
Jul 1, 2026
Steelfab · ANCHORAGE, AK
Jul 1, 2026
Steelfab · ANCHORAGE, AK
Jun 25, 2026
Michigan Seamless Tube LLC · SOUTH LYON, MI
More inspections in OK
Jul 15, 2026
LA Union 7 LLC · TULSA, OK
Jul 13, 2026
Latshaw Drilling Company · STILLWATER, OK
Jul 10, 2026
American Wheatley · BROKEN ARROW, OK
Jul 9, 2026
U.S. Department of Defense, Tinker AIR Force Base · TINKER AFB, OK
Jul 8, 2026
Walmart, INC. · OCHELATA, OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348247388.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.