Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

WAXAHACHIE, TX —

OSHA Inspection: LEODEGARIO MENDOZA

Planned inspection · Health discipline

At a glance

On , OSHA opened a planned health inspection of LEODEGARIO MENDOZA in 576 MOONRISE STREET, WAXAHACHIE, TX 75165 (NAICS 238140). OSHA activity number 348253329.

Watch Leodegario Mendoza — free Get an email when a new federal OSHA severe-injury report for Leodegario Mendoza is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
LEODEGARIO MENDOZA
Site address
576 MOONRISE STREET
City
WAXAHACHIE
State
TX
ZIP
75165
Mailing
713 GRUBB CIRCLE, MESQUITE, TX 75149

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Last modified
Data loaded

Establishment context

NAICS code
238140
Employees
2
Ownership type
A

Citations

9 citations on file for this inspection.

1910.134 A02

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2128.00 · Current $2128.00

General-duty citation text

29 CFR 1910.134(a)(2):  A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee:   On or about March 28, 2025, and at times prior thereto, employees who were cutting masonry stone with a Makita right hand saw were not provided a respirator.
Recent events (1)
  • — Z (S) $2128

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2837.00 · Current $2837.00

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:   On or about March 28, 2025, and at times prior thereto, employees were not provided eye or face protection protection when operating a Makita right angle grinder while cutting bricks and stone.
Recent events (1)
  • — Z (S) $2837

1926.300 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2837.00 · Current $2837.00

General-duty citation text

29 CFR  1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:    On or about March 28, 2025, and at times prior thereto, employees operating a Makita 14" right hand angle saw blade was not equipped with a guard while cutting concrete stone/brick.
Recent events (1)
  • — Z (S) $2837

1926.451 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3547.00 · Current $3547.00

General-duty citation text

29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.  On or about March 28, 2025, and at times prior thereto, employees worked from a welded frame scaffold without guardrails 10-feet above the lower level.
Recent events (1)
  • — Z (S) $3547

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3547.00 · Current $3547.00

General-duty citation text

29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  On or about March 28, 2025, and at times prior thereto, employees worked from a welded frame scaffold without ladder access.
Recent events (1)
  • — Z (S) $3547

1926.451 G04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00

General-duty citation text

29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.  On or about March 28, 2025, and at times prior thereto, employees worked from a welded frame scaffold without guardrails 10-feet above the lower level.
Recent events (1)
  • — Z (S) $4965

1926.1153 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2128.00 · Current $2128.00

General-duty citation text

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  On or about March 28, 2025, and at times prior thereto, the employer did not ensure that employees using a Makita right hand angle saw to cut bricks/stone were protected from being exposed to silica dust with the use of engineering controls, work practices and respiratory protection.
Recent events (1)
  • — Z (S) $2128

1926.1153 D02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  On or about March 28, 2025, and at times prior thereto, the employer did not assess the exposure for employees using a Makita right hand angle saw to cut bricks and stones. Employees were potentially exposed to silica.
Recent events (1)
  • — Z (S) $0

1926.454 A

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  On or about March 28, 2025, and at times prior thereto, employees were working on a welded frame scaffold without trained to recognize and remove hazards.  The employees performing masonry activities on the ground below were exposed to being struck by material falling from above and fall hazards.
Recent events (1)
  • — Z (O) $0

More inspections in this industry (NAICS 238140)

More inspections in TX

SNYDER, TX—2026-07-16 00:00:00

RNWBL

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348253329.