SCHNECKSVILLE, PA —
OSHA Inspection: DALLA'S MACHINE, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of DALLA'S MACHINE, INC. in 4410 PARK VIEW DR., SCHNECKSVILLE, PA 18078 (NAICS 332710). OSHA activity number 348257270.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Dalla'S Machine, INC. — free
Get an email when a new federal OSHA severe-injury report for Dalla'S Machine, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- DALLA'S MACHINE, INC.
- Site address
- 4410 PARK VIEW DR.
- City
- SCHNECKSVILLE
- State
- PA
- ZIP
- 18078
- Mailing
- 4410 PARK VIEW DR., SCHNECKSVILLE, PA 18078
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 60
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C06 I
- Issued
- Nov 14, 2025
- Abate by
- Jan 5, 2026
- Penalty
- Initial $5,627 · Current $3,376 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) 4410 Park View Dr, SCHNECKSVILLE, PA 18078: On or about May 20, 2025, the employer did not conduct evaluations of machine specific lockout/ tagout procedures and authorized personnel on at least an annual basis.
Recent events (2)
- — I (S) $3376.2
- — Z (S) $5627
1910.147 C07 IV
- Issued
- Nov 14, 2025
- Abate by
- Jan 5, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv):The employer did not keep the accomplished certified employee training to date: a) 4410 Park View Dr, SCHNECKSVILLE, PA 18078: On or about May 20, 2025, the employer did not maintain certification of hazardous energy control training to include employee name and date of training.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Nov 14, 2025
- Penalty
- Initial $4,783 · Current $2,870 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main CNC area: On or about May 20, 2025, guarding was not provided for the chuck on the Delta drill press, Serial No. 9429. This condition exposes employees to entanglement injuries and flying debris. b) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main CNC area near the coffee pot and microwave: On or about May 20, 2025, guarding was not provided for the chuck on the Delta 8" drill press. This condition exposes employees to entanglement injuries and flying debris. c) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main CNC area near the portable underhung hoist: On or about May 20, 2025, guarding was not provided for the chuck on the Craftsman drill press. This condition exposes employees to entanglement injuries and flying debris. d) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main CNC area near the Lynx 2100 CNC: On or about May 20, 2025, guarding was not provided for the chuck on the Jett drill press. This condition exposes employees to entanglement injuries and flying debris. e) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main CNC area: On or about May 20, 2025, guarding was not provided for the chuck on the Kingston lathe. This condition exposes employees to entanglement injuries and flying debris. f) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025, guarding was not provided for the chuck on the Harding lathe, number 21. This condition exposes employees to entanglement injuries and flying debris. g) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025 guarding was not provided for the chuck on the Bridgeport machine. This condition exposes employees to entanglement injuries and flying debris. h) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025, guarding was not provided for the chuck on the "black" drill press. This condition exposes employees to entanglement injuries and flying debris. i) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025, guarding was not provided for the chuck on the Sharp drill press #56. This condition exposes employees to entanglement injuries and flying debris. j) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025, guarding was not provided for the chuck on the Sharp drill press #24. This condition exposes employees to entanglement injuries and flying debris. k) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025, guarding was not provided for the chuck on the Sharp drill press #23. This condition exposes employees to entanglement injuries and flying debris. l) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , manual machine area: On or about May 20, 2025, guarding was not provided for the chuck on the Bridgeport drill press #16. This condition exposes employees to entanglement injuries and flying debris. m) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , building 2, plastic works: On or about May 20, 2025, guarding was not provided for the chuck on the Bridgeport drill press #17. This condition exposes employees to entanglement injuries and flying debris. n) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , building 2, plastic works: On or about May 20, 2025, guarding was not provided for the chuck on the Clausing lathe. This condition exposes employees to entanglement injuries and flying debris. o) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , building 2, plastic works, small room: On or about May 20, 2025, guarding was not provided for the chuck on the Ryobi drill press. This condition exposes employees to entanglement injuries and flying debris. p) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , building 2, plastic works, small room: On or about May 20, 2025, guarding was not provided for the chuck on the Manhattan drill press. This condition exposes employees to entanglement injuries and flying debris.
Recent events (2)
- — I (S) $2869.8
- — Z (S) $4783
1910.303 G01
- Issued
- Nov 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main shop area: On or about May 20, 2025, the electrical service panels were obstructed and blocked by an orange tool box. b) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , main shop area: On or about May 20, 2025, the electrical disconnect was obstructed and blocked by a black mini refrigerator and a coffee station. c) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , welding shop area: On or about May 20, 2025, the electrical disconnect was obstructed and blocked by a Dayton grinder. d) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , building 2, plastics area: On or about May 20, 2025, the electrical service panel was obstructed and blocked by a microwave cart and a cabinet. e) 4410 Park View Dr, SCHNECKSVILLE, PA 18078 , building 2, plastics area: On or about May 20, 2025, the electrical service panel was obstructed and blocked by cart with a toaster and debris.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Dalla'S Machine, INC.
Oct 17, 2018
SCHNECKSVILLE, PA
Dec 8, 2003
SCHNECKSVILLE, PA
Jul 19, 2002
SCHNECKSVILLE, PA
Nov 8, 1993
SCHNECKSVILLE, PA
View Dalla'S Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
Jul 16, 2026
Omni Components Corp. · HUDSON, NH
Jul 16, 2026
111613 - FOX Engineering LLC · CAMBRIDGE, MN
Jul 16, 2026
Manson Manufacturing LLC DBA Tomco Manufacturing · WIXOM, MI
Jul 16, 2026
Four WAY Industries INC · CLAWSON, MI
Jul 16, 2026
Four WAY Industries INC · CLAWSON, MI
More inspections in PA
Jul 17, 2026
FOX Tapping INC. · COLUMBIA, PA
Jul 17, 2026
Columbia Water CO · COLUMBIA, PA
Jul 17, 2026
NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA
Jul 16, 2026
Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA
Jul 16, 2026
Center City Construction and Development, LLC · PHILADELPHIA, PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348257270.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.