MONTPELIER, ID —
OSHA Inspection: JENSEN LUMBER CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JENSEN LUMBER CO., INC. in 20335 U.S. HIGHWAY 89, MONTPELIER, ID 83254 (NAICS 321113). OSHA activity number 348257395.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JENSEN LUMBER CO., INC.
- Site address
- 20335 U.S. HIGHWAY 89
- City
- MONTPELIER
- State
- ID
- ZIP
- 83254
- Mailing
- 20335 U.S. HIGHWAY 89, MONTPELIER, ID 83254
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 14
- Ownership type
- A
Citations
6 citations on file for this inspection.
1903.19 C01
- Issued
- Mar 10, 2026
- Abate by
- Apr 3, 2026
- Penalty
- Initial $319 · Current $319
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: a)The employer did not provide certification of abatement for Serious Citation 1, Item 1a, issued on August 25, 2025, with an abatement due date of September 19, 2025. b)The employer did not provide certification of abatement for Serious Citation 1, Item 1b, issued on August 25, 2025, with an abatement due date of September 19, 2025. c)The employer did not provide certification of abatement for Serious Citation 1, Item 1c, issued on August 25, 2025, with an abatement due date of September 19, 2025. d)The employer did not provide certification of abatement for Serious Citation 1, Item 2, issued on August 25, 2025, with an abatement due date of September 19, 2025. e)The employer did not provide certification of abatement for Serious Citation 1, Item 3, issued on August 25, 2025, with an abatement due date of September 19, 2025.
Recent events (1)
- — Z (O) $319
5(a)(1)
- Issued
- Aug 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $2,270 · Current $2,270
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that, employees were exposed to struck-by and crushed-by hazards: (a) On May 19, 2025, and times prior to, employees operated the Eagle Picher Model RO60, Serial No. 31AO3652 forklift which was not equipped with an operator restraint device such as a seatbelt.
Recent events (1)
- — Z (S) $2270
1910.178 P01
- Issued
- Aug 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) On May 19, 2025, and times prior to, employees operated an Eagle Picher Model RO60, Serial No. 31AO3652 forklift that was in need of repair. The forklift's steering column housing was broken, exposing internal components.
Recent events (1)
- — Z (S) $0
1910.178 M03
- Issued
- Aug 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(m)(3): Unauthorized personnel were permitted to ride on industrial truck(s): (a) On May 19, 2025, employees were observed riding as passengers on a moving forklift. One employee was standing on the sidestep and the other employee was sitting on the rear fender.
Recent events (1)
- — Z (S) $0
1910.147 C01
- Issued
- Aug 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On May 19, 2025, and times prior to, employees performed maintenance and blade adjustments on the Jackson Harvester Vertical Edger, Model VE-200-PBE175, without an implemented lockout/tagout program.
Recent events (1)
- — Z (S) $2838
1910.178 L01 I
- Issued
- Aug 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $2,270 · Current $2,270
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) On May 19, 2025, and times prior to, employees operated an Eagle Picher Model RO60, Serial No. 31AO3652 forklift to move lumber throughout the yard.
Recent events (1)
- — Z (S) $2270
More inspections at Jensen Lumber CO., INC.
View Jensen Lumber CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348257395.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.