OSHA Inspection: EMILIANO'S CRANE SERVICES LLC

Issued

Sep 3, 2025

Abate by

Oct 21, 2025

Penalty

Initial $398 · Current $398

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  On or about 08/27/2025, the employer failed to submit certification of corrective action for citation 1, item 1 and citation 1, item 2 issued on 06/05/2025 with an abatement due date of 07/24/2025.

Issued

Sep 3, 2025

Abate by

Oct 8, 2025

Penalty

Initial $398 · Current $398

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  a) On or about 08/27/2025, the employer failed to submit documents demonstrating that abatement is complete for the following citations items issued on 06/05/2025 with an abatement due date on 07/24/2025:  1-1. Lot #25: On 05/16/2025, the employer exposed employees to struck-by hazards while installing trusses, in that the employer is not performing annual inspections of the crane by a competent person and did not inspect the crane and related equipment for deficiencies prior to the start of operations on site. No annual inspection was performed on the Altec Crane Model AC38-103.  1-2. Ground level, Lot #25: On 05/22/2025, the employer exposed employees to struck-by hazards while installing roof trusses with a truck-mounted crane, in that the crane operator was not certified or licensed to operate the Altec Crane Model AC38-103.

Issued

Jun 5, 2025

Abate by

Jul 24, 2025

Penalty

Initial $2,837 · Current $2,837

General-duty citation text

29 CFR  1926.1412(f)(1):29 CFR 1926.1412(f)(1): The equipment was not inspected at least every 12 months by a qualified person in accordance with paragraph (d) of this section.  a) Lot #25: On 05/16/2025, the employer exposed employees to struck-by hazards while installing trusses, in that the employer is not performing annual inspections of the crane by a competent person and did not inspect the crane and related equipment for deficiencies prior to the start of operations on site. No annual inspection was performed on the Altec Crane Model AC38-103.

Issued

Jun 5, 2025

Abate by

Jul 24, 2025

Penalty

Initial $4,965 · Current $4,965

General-duty citation text

29 CFR  1926.1427(a): General requirements for operators. The employer did not ensure that each operator is trained, certified/ licensed, and evaluated in accordance with this section before operating any equipment covered under subpart CC, except for the equipment listed in paragraph (a)(2) of this section.  a) Ground level, Lot #25: On 05/22/2025, the employer exposed employees to struck-by hazards while installing roof trusses with a truck-mounted crane, in that the crane operator was not certified or licensed to operate the Altec Crane Model AC38-103.

Issued

Jun 5, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.1424(a)(2)(ii): To prevent employees from entering hazard areas, the employer did not erect and maintain control lines, warning lines, railings or similar barriers to mark the boundaries of the hazard areas and/or did not train each employee to understand what these markings signify.  a) Ground level, Lot #25: the crane operator did not ensure that the hazardous area was marked or barricaded to keep employees from being in the area.