WOODBINE, GA —
OSHA Inspection: CENTURY METAL LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CENTURY METAL LLC in 1506 BEDELL AVENUE, WOODBINE, GA 31569 (NAICS 332322). OSHA activity number 348290503.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTURY METAL LLC
- Site address
- 1506 BEDELL AVENUE
- City
- WOODBINE
- State
- GA
- ZIP
- 31569
- Mailing
- 1506 BEDELL AVENUE, WOODBINE, GA 31569
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 7
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C01
- Issued
- Nov 21, 2025
- Abate by
- Dec 11, 2025
- Penalty
- Initial $2,270 · Current $2,270
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Shop area: On or about June 4, 2025, and times prior to, the employer exposed employees to electrical and caught-in hazards, in that the employer did not establish an energy control program.
Recent events (1)
- — Z (S) $2270
1910.178 L04 III
- Issued
- Nov 21, 2025
- Abate by
- Dec 18, 2025
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) Shop area: On or about June 4, 2025, and times prior to, the employer exposed employees to a struck-by hazard, in that powered industrial truck operators were not evaluated at least once every three years.
Recent events (1)
- — Z (S) $2838
1910.178 Q07
- Issued
- Nov 21, 2025
- Abate by
- Dec 18, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were being placed in services after the examination showed condition(s) adversely affecting the safety of the vehicle: (a) Shop area: On or about June 4, 2025, and times prior to, the employer exposed employees to a struck-by hazard, in that a Hyundai HHKHFZ21J0000161 powered industrial truck was operated with a broken mirror.
Recent events (1)
- — Z (S) $0
1910.212 A01
- Issued
- Nov 21, 2025
- Abate by
- Dec 11, 2025
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. (a) Shop area: On or about June 4, 2025, and times prior to, the employer exposed employees to a caught-in hazard, in that machine guarding was not provided for the Slitter Machine roller.
Recent events (1)
- — Z (S) $2838
1910.178 L06
- Issued
- Nov 21, 2025
- Abate by
- Dec 18, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) Shop area: On or about June 4, 2025, and times prior to, the employer exposed employees to a struck-by hazard, in that the employer did not certify that each powered industrial truck operator was trained and evaluated prior to operation of forklifts.
Recent events (1)
- — Z (O) $0
1910.1200 E01
- Issued
- Nov 21, 2025
- Abate by
- Jan 12, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): (Construction Reference: 1926.59). (a) Shop: On or about June 4, 2025, and times prior to, the employer exposed employees to a health hazard, in that a written Hazardous Communications Program was not developed and implemented for employees that worked with hazardous chemicals including propane.
Recent events (1)
- — Z (O) $0
1910.1200 G08
- Issued
- Nov 21, 2025
- Abate by
- Dec 18, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical (a) Shop: On or about June 4, 2025, and times prior to, the employer exposed employees to a health hazard, in that the employer did not have a safety data sheet (SDS) for each hazardous chemical used, where employees worked with hazardous chemicals including propane.
Recent events (1)
- — Z (O) $0
More inspections at Century Metal LLC
View Century Metal LLC's full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348290503.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.