ELMHURST, IL —
OSHA Inspection: ADAN DEGANTE DBA ADAN DEGANTE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ADAN DEGANTE DBA ADAN DEGANTE in 224 CRESCENT AVE., ELMHURST, IL 60126 (NAICS 238170). OSHA activity number 348296286.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADAN DEGANTE DBA ADAN DEGANTE
- Site address
- 224 CRESCENT AVE.
- City
- ELMHURST
- State
- IL
- ZIP
- 60126
- Mailing
- 305 8TH STREET, WHEELING, IL 60090
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 8, 2025
- Penalty
- Initial $2,128 · Current $885 Reduced
General-duty citation text
29 CFR 1926.102(a)(1):The employer did not ensure that each affected employee use appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors or potentially injurious light radiation. On or about June 3, 2025, employees engaged in residential siding operations were exposed to eye injury hazards while operating pneumatic nail guns without eye protection. The employer did not ensure that employees that were installing siding material while utilizing pneumatic guns were using safety glasses. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $885
- — Z (S) $2128
1926.451 F06
- Issued
- Aug 8, 2025
- Abate by
- Aug 29, 2025
- Penalty
- Initial $4,965 · Current $2,035 Reduced
General-duty citation text
29 CFR 1926.451(f)(6): The clearance between scaffolds and power lines shall be as follows: Scaffolds shall not be erected, used, dismantled, altered, or moved such that they or any conductive material handled on them might come closer to exposed and energized power lines than as follows: Insulated Lines Voltage: Less than 300 volts Minimum distance: 3 feet (0.9) Exception to paragraph (f)(6): Scaffolds and materials may be closer to power lines than specified above where such clearance is necessary for performance of work, and only after the utility company, or electrical system operator, has been notified of the need to work closer and the utility company, or electrical system operator, has deenergized the lines, relocated the lines, or installed protective coverings to prevent accidental contact with the lines. On or about June 3, 2025, employees were exposed to electrical hazards while engaged in siding activities and working from scaffolds near electrical powerlines. The clearance between the scaffold and power lines was not as required. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $2035
- — Z (S) $4965
1926.451 G01
- Issued
- Aug 8, 2025
- Penalty
- Initial $3,547 · Current $1,545 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section. On or about June 3, 2025, Employees were exposed to fall hazards in approximately 11 feet 4 inches height while performing siding construction activities from a pump jack scaffold. No fall protection was being utilized. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $1545
- — Z (S) $3547
1926.454 A01
- Issued
- Aug 8, 2025
- Abate by
- Oct 15, 2025
- Penalty
- Initial $4,965 · Current $2,035 Reduced
General-duty citation text
29 CFR 1926.454(a)(1): The employer failed to have each employee who performs work while on a scaffold trained regarding the nature of any electrical hazards, fall hazards and falling object hazards in the work area. a) On or about June 3, 2025, the employer did not ensure that employees had been trained to recognize and minimize fall hazards. Employees were exposed to fall hazards in approximately 11 feet 4 inches high while performing siding activities from a pump jack scaffold on a residential structure without using fall protection. b) On or about June 3, 2025, the employer did not ensure that employees engaged in residential construction activities near overhead powerline were trained in electrical hazards. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $2035
- — Z (S) $4965
More inspections in this industry (NAICS 238170)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348296286.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.