ASHLAND, MS —
OSHA Inspection: IRON CRAFTERS SECURITY PRODUCTS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of IRON CRAFTERS SECURITY PRODUCTS, INC. in 835 IRON CRAFTERS RD, ASHLAND, MS 38603 (NAICS 332999). OSHA activity number 348310228.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IRON CRAFTERS SECURITY PRODUCTS, INC.
- Site address
- 835 IRON CRAFTERS RD
- City
- ASHLAND
- State
- MS
- ZIP
- 38603
- Mailing
- P.O. BOX 277, ASHLAND, MS 38603
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C01
- Issued
- Sep 15, 2025
- Abate by
- Oct 7, 2025
- Penalty
- Initial $2,128 · Current $1,277 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite-specific procedures was not established and implemented for required respirator use: (a) Paint Shop - On or about June 11, 2025, the employer did not have a written respiratory protection program for employees required to wear a respirator during sand blasting.
Recent events (2)
- — I (S) $1276.8
- — Z (S) $2128
1910.134 E01
- Issued
- Sep 15, 2025
- Abate by
- Oct 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace: (a) Facility - On or about June 11, 2025, the employer did not provide a medical evaluation for the employee required to wear a respirator during sandblasting tasks.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Sep 15, 2025
- Abate by
- Oct 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece was used, and at least annually thereafter: (a) Facility - On or about June 11, 2025, the employer did not ensure that the sandblaster was fit tested prior to using a NIOSH N95 respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K
- Issued
- Sep 15, 2025
- Abate by
- Oct 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): The employer did not provide effective training to employees who are required to use respirators: (a) Facility - On or about June 11, 2025, the employer did not provide respiratory training for the employee required to wear a respirator during sandblasting.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Sep 15, 2025
- Abate by
- Oct 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Facility - On or about June 11, 2025, the employer had not developed and implemented a hazard communication program governing the usage of hazardous chemicals such as weld splatter, cutting fluid, and powder coating.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F10
- Issued
- Sep 15, 2025
- Abate by
- Oct 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(10): The employer did not ensure that workplace labels or other forms of warnings were prominently displayed on the container or readily available in the work area throughout each work shift: (a) Two-Inch Weld Station - On or about June 11, 2025, the employer did not label a spray bottle containing weld splatter with the appropriate identity.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Iron Crafters Security Products, INC.
View Iron Crafters Security Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348310228.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.