MIDLOTHIAN, TX —
OSHA Inspection: UBALDO MORENO PRECIADO
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of UBALDO MORENO PRECIADO in 1878 ROUGH RIDGE TRAIL, MIDLOTHIAN, TX 76065 (NAICS 238140). OSHA activity number 348315326.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UBALDO MORENO PRECIADO
- Site address
- 1878 ROUGH RIDGE TRAIL
- City
- MIDLOTHIAN
- State
- TX
- ZIP
- 76065
- Mailing
- 1878 ROUGH RIDGE TRAIL, MIDLOTHIAN, TX 76065
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 28, 2025
- Abate by
- Sep 9, 2025
- Penalty
- Initial $1,929 · Current $1,929
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: On or about May 22, 2025, at 1878 Rough Ridge Trail in Midlothian, Texas, employees who were cutting masonry stone and bricks with a DeWalt masonry saw were not provided eye or face protection.
Recent events (1)
- — Z (S) $1929
1926.300 B01
- Issued
- Aug 28, 2025
- Abate by
- Sep 9, 2025
- Penalty
- Initial $2,270 · Current $2,270
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: On or about May 55, 2025, at 1878 Rough Ridge Trail in Midlothian, Texas, employees operated a DeWalt masonry saw that was not equipped with a lower blade guard to cut concrete stone/brick.
Recent events (1)
- — Z (S) $2270
1926.1153 C01
- Issued
- Aug 28, 2025
- Abate by
- Sep 9, 2025
- Penalty
- Initial $1,702 · Current $1,702
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. On or about May 22, 2025, at 1878 Rough Ridge Trail in Midlothian, Texas, the employer did not ensure that employees who used a DeWalt masonry saw to cut bricks/stone were protected from being exposed to silica dust with the use of engineering controls, work practices and respiratory protection.
Recent events (1)
- — Z (S) $1702
1910.134 C01
- Issued
- Aug 28, 2025
- Abate by
- Sep 9, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1): In any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer, the employer shall establish and implement a written respiratory protection program with worksite-specific procedures. The program shall be updated as necessary to reflect those changes in workplace conditions that affect respirator use. The employer shall include in the program the following provisions of this section, as applicable: On or about May 22, 2025, at 1878 Rough Ridge Trail in Midlothian, Texas, employees who were cutting masonry stone and brick with a Dewalt masonry saw were not provided a respirator.
Recent events (1)
- — Z (S) $0
1926.1153 D02 I
- Issued
- Aug 28, 2025
- Abate by
- Sep 9, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: On or about May 22, 2025, at 1878 Rough Ridge Trail in Midlothian, Texas, the employer did not assess the exposure for employees who used a DeWalt masonry saw to cut bricks and stones. Employees were potentially exposed to silica.
Recent events (1)
- — Z (S) $0
More inspections at Ubaldo Moreno Preciado
View Ubaldo Moreno Preciado's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348315326.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.