Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GEO PREP MID-CITY, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of GEO PREP MID-CITY, INC. in 1900 LOBDELL BLVD, BATON ROUGE, LA 70816 (NAICS 611710). OSHA activity number 348322264.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch GEO Prep Mid-City, INC. — free Get an email when a new federal OSHA severe-injury report for GEO Prep Mid-City, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1900 LOBDELL BLVD
City
BATON ROUGE
State
LA
ZIP
70816
Mailing
3145 NORTH MERIDIAN STREET, INDIANAPOLIS, IN 46208
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
611710
Employees
150
Ownership type
A

4 citations on file for this inspection.

1910.333 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 17, 2025
Abate by
Mar 30, 2026
Penalty
Initial $14,895 · Current $10,000 Reduced
29 CFR  1910.333(a)(1): Live parts to which an employee may be exposed were not deenergized before the employee worked on or was near to them:  a) On or about June 19, 2025, on the third floor of the building, an employee tasked with replacing ballast lighting with LED fixtures worked on energized gear without first verifying electrical sources were deenergized or rendered safe.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $14895

1910.333 B02 I

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 17, 2025
Abate by
Mar 30, 2026
Penalty
Initial $14,895 · Current $10,000 Reduced
29 CFR  1910.333(b)(2)(i): The employer did not maintain a written copy of the procedures outlined in paragraph (b)(2) of 29 CFR 1910.333 and did not make it available for inspection by the Assistant Secretary of Labor and his or her authorized representatives:  a) On or about June 19, 2025, on the third floor of the building, an employee while replacing ballast lighting with LED fixtures, attempted to isolate electrical equipment without having a lockout/tagout procedure or policy.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $14895

1910.333 B02 II B

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 17, 2025
Abate by
Mar 30, 2026
Penalty
Initial $14,895 · Current $10,000 Reduced
29 CFR  1910.333(b)(2)(ii)(B): The circuits and equipment to be worked on shall be disconnected from all electric energy sources. Control circuit devices, such as push buttons, selector switches, and interlocks, may not be used as the sole means for deenergizing circuits or equipment. Interlocks for electric equipment may not be used as a substitute for lockout and tagging procedures.  a) On or about June 19, 2025 on the third floor of the building, an employee tasked with replacing ballast light with LED fixture removed the old ballast lighting without first deenergizing power to the fixture.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $14895

1910.333 B02 III A

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 17, 2025
Abate by
Mar 30, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.333(b)(2)(iii)(A): A lock and a tag shall be placed on each disconnecting means used to deenergize circuits and equipment on which work is to be performed, except as provided in paragraphs (b)(2)(iii)(C) and (b)(2)(iii)(E) of this section. The lock shall be attached so as to prevent persons from operating the disconnecting means unless they resort to undue force or the use of tools.  a) On or about June 19, 2025, on the third floor of the building, an employee while replacing ballast lighting with LED fixtures, attempted to isolate electrical equipment without having a lock or tag placed on energy sources such as breakers to prevent unauthorized use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348322264.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.