WAYNE, NJ —
OSHA Inspection: AMERICAN WOODCARVING, L.L.C.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of AMERICAN WOODCARVING, L.L.C. in 1123 ROUTE 23 SOUTH, WAYNE, NJ 07470 (NAICS 321999). OSHA activity number 348331158.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN WOODCARVING, L.L.C.
- Site address
- 1123 ROUTE 23 SOUTH
- City
- WAYNE
- State
- NJ
- ZIP
- 07470
- Mailing
- 1123 ROUTE 23 SOUTH, WAYNE, NJ 07470
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Dec 11, 2025
- Penalty
- Initial $2,128 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: a) Facility: An employee was required to wear a 3M half-face elastomeric respirator while paining wooden products. The employer did not establish and implement a written respiratory protection program with worksite-specific procedures, on or about 6/25/2025.
Recent events (2)
- — I (S) $1100
- — Z (S) $2128
1910.134 E01
- Issued
- Dec 11, 2025
- Abate by
- Jan 12, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. a) Facility: An employee was required to wear a 3M half-face elastomeric respirator while he painted wooden products. The employer did not provide a medical evaluation to determine the employee's ability to use the respirator, on or about 6/25/2025.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K01 VII
- Issued
- Dec 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1)(vii): The employer did not ensure that each user could demonstrate knowledge of the general requirements of 29 CFR 1910.134: a) Facility: The employer did not ensure that an employee knew about requirements of a medical evaluation before he was required to wear 3M half-face elastomeric respirator during spray-painting wooden products, on or about 6/25/2025.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 A01 I
- Issued
- Dec 11, 2025
- Penalty
- Initial $2,128 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.252(a)(1)(i): When the object to be welded or cut could not be readily moved, all movable fire hazards in the vicinity were not taken to a safe place: a) Production Room: Flammable materials including about half a gallon of Klean Strip Denatured Alcohol and half a gallon of Klean Strip Paint Thinner were located in about six - seven feet from the work site when employees performed wire feed welding, on or about 12/02/2025.
Recent events (2)
- — I (S) $1200
- — Z (S) $2128
1910.252 A02 VII
- Issued
- Dec 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(2)(vii): Where practicable, combustible materials were not relocated at least 35 feet (10.7 m) from the cutting or welding operation work site. a) Production Room: Combustible materials including pieces of cardboard were located in about six - seven feet from the work site when employees performed wire feed welding, on or about 12/02/2025.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 321999)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348331158.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.