SCHILLER PARK, IL —
OSHA Inspection: E. J. BASLER CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of E. J. BASLER CO. in 9511 AINSLIE STREET, SCHILLER PARK, IL 60176 (NAICS 332721). OSHA activity number 348362591.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- E. J. BASLER CO.
- Site address
- 9511 AINSLIE STREET
- City
- SCHILLER PARK
- State
- IL
- ZIP
- 60176
- Mailing
- 9511 AINSLIE STREET, SCHILLER PARK, IL 60176
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332721
- Employees
- 159
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C06 I
- Issued
- Nov 26, 2025
- Abate by
- Dec 23, 2025
- Penalty
- Initial $5,426 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Facility wide - On or about July 7, 2025, the employer did not ensure that periodic inspections of the energy control procedures were conducted at least annually to ensure that the procedures and requirements of their energy control program were properly implemented and followed by employees. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $2000
- — Z (S) $5426
1910.212 A01
- Issued
- Nov 26, 2025
- Abate by
- Dec 23, 2025
- Penalty
- Initial $7,235 · Current $5,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) ACME Department and Tool Room- On or about July 7, 2025, the employer did not ensure that employees were adequately protected from hazards created by rotating parts, such as the unused portions of the blade on the HL Cosen C-250 NC Horizontal Bandsaw and the Jet Horizontal Bandsaw. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $5500
- — Z (S) $7235
1910.215 A04
- Issued
- Nov 26, 2025
- Abate by
- Dec 23, 2025
- Penalty
- Initial $5,426 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a) ACME Department and Tool Room- The employer did not ensure the work rests were in place and properly adjusted to no more than a 1/8 inch opening to support offhand grinding work on equipment, such as the Baldor bench grinders. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $2000
- — Z (S) $5426
1910.215 A04
- Issued
- Nov 26, 2025
- Abate by
- Dec 23, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) ACME Department and Tool Room- On or about July 7, 2025, the employer did not ensure that the tongue guards on the Balder Bench Grinders were properly adjusted to not exceed one fourth of an inch. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at E. J. Basler CO.
View E. J. Basler CO.'s full OSHA safety record →
More inspections in this industry (NAICS 332721)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348362591.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.