CATOOSA, OK —
OSHA Inspection: KELVION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KELVION INC. in 5202 W. CHANNEL ROAD, CATOOSA, OK 74015 (NAICS 333415). OSHA activity number 348369620.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KELVION INC.
- Site address
- 5202 W. CHANNEL ROAD
- City
- CATOOSA
- State
- OK
- ZIP
- 74015
- Mailing
- 1105 W. MAIN PARKWAY, CATOOSA, OK 74015
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333415
- Employees
- 700
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.29 B03
- Issued
- Nov 25, 2025
- Penalty
- Initial $7,093 · Current $0 Reduced
General-duty citation text
29 CFR 1910.29(b)(3): The employer did not ensure that guardrail systems are capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied in a downward or outward direction within 2 inches (5 cm) of the top edge, at any point along the top rail. On or about May 28, 2025, and at times prior, located in the center section of the Skiatook building, a guardrail was in place that was not capable of withstanding 200 pounds of force in an outward direction when the guardrail was not properly secured to the foundation.
Recent events (2)
- — I (S) $0
- — Z (S) $7093
1910.212 A01
- Issued
- Nov 25, 2025
- Penalty
- Initial $12,059 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks in the following instances: Instance a: On or about May 28, 2025, and at times prior, located in the Section A 276, employees operated the Fortune Lather Seriers 1640, Serial Number: 564965, where a method of machine guarding was not provided. Instance b: On or about May 28, 2025, and at times prior, located in the Skiatook building, employees operated finning machines where a method of machine guarding was not provided.
Recent events (2)
- — I (S) $0
- — Z (S) $12059
1910.253 B05 II D
- Issued
- Nov 25, 2025
- Penalty
- Initial $9,457 · Current $0 Reduced
General-duty citation text
29 CFR 1910.253(b)(5)(ii)(D): Cylinders were not secured on a special truck, regulators were not removed and valve protection caps, when provided for, were not put in place before cylinders were moved: On or around May 28, 2025, and at times prior, located in the Skiatook building, employees conducted welding operations where an acetylene cylinder regulator was not removed from the cylinder prior to storage.
Recent events (2)
- — I (S) $0
- — Z (S) $9457
1910.303 B01
- Issued
- Nov 25, 2025
- Penalty
- Initial $12,059 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees, in that the employer did not ensure the safety of the equipment pursuant to the considerations in sections (i) through (viii) of 29 CR 1910.303(b)(1): On or about May 28, 2025, and at times prior, located in the Skiatook building and in the Cimarron building, electrical outlet boxes and junctions were observed to have physical damage to the equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $12059
1910.304 G05
- Issued
- Nov 25, 2025
- Penalty
- Initial $6,029 · Current $0 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: On or May 28, 2025, and at times prior, located in section A276 of the Skiatook building, an electrical outlet was in use where the plug had shown reverse polarity during testing.
Recent events (2)
- — I (S) $0
- — Z (S) $6029
1910.253 E06 II
- Issued
- Nov 25, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(e)(6)(ii): Where regulators or parts of regulators, including gages, need repair, the repair should be made by a qualified person. On or about May 28, 2025, and at times prior, located in G375 of the cimarron building, a regulator gauge was damaged and missing the face covering on the regulator.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Kelvion INC.
View Kelvion INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333415)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348369620.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.