SAN ANTONIO, TX ·
OSHA Inspection: DE LA GARZA FENCE CO. INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DE LA GARZA FENCE CO. INC. in 6475 W OLD US HIGHWAY 90, SAN ANTONIO, TX 78227 (NAICS 332618). OSHA activity number 348378753.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DE LA GARZA FENCE CO. INC.
- Site address
- 6475 W OLD US HIGHWAY 90
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78227
- Mailing
- 6475 W OLD US HIGHWAY 90, SAN ANTONIO, TX 78227
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332618
- Employees
- 23
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 5, 2025
- Abate by
- Dec 29, 2025
- Penalty
- Initial $2,128 · Current $1,277 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Instance A: On or about July 17, 2025, employees in the fabrication shop were utilizing a drill press that was not guarded in a way to protect from point of operation and rotating part hazards. Instance B: On or about July 17, 2025, employees in the fabrication shop were utilizing an electric Pipe Nibbler Press that was not guarded in a way to protect from point of operation and ingoing nip point hazards. Instance C: On or about July 17, 2025, employees in the fabrication shop were utilizing a Roller Pipe Cutter was not guarded in a way to protect from point of operation and rotating part hazards.
Recent events (2)
- · I (S) $1276.8
- · Z (S) $2128
1910.253 B04 III
- Issued
- Dec 5, 2025
- Penalty
- Initial $2,128 · Current $1,277 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii):Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet. On or about July 17, 2025, employees in the fabrication shop were storing used oxygen and acetylene tanks together (less than 20 feet apart).
Recent events (2)
- · I (S) $1276.8
- · Z (S) $2128
1910.305 G01 IV
- Issued
- Dec 5, 2025
- Penalty
- Initial $2,128 · Current $1,277 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv):Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv)(a). On or about July 17, 2025, employees in the fabrication shop were utilizing a permanently fixed Roller Pipe Cutter that was powered by a flexible (extension) cord as a substitute for fixed wiring.
Recent events (2)
- · I (S) $1276.8
- · Z (S) $2128
More inspections in this industry (NAICS 332618)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348378753.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.