TWIN CITY, GA —
OSHA Inspection: TWIN CITY QUALITY BUILDINGS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TWIN CITY QUALITY BUILDINGS, INC. in 700 NORTH RAILROAD AVENUE, TWIN CITY, GA 30471 (NAICS 321992). OSHA activity number 348380494.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TWIN CITY QUALITY BUILDINGS, INC.
- Site address
- 700 NORTH RAILROAD AVENUE
- City
- TWIN CITY
- State
- GA
- ZIP
- 30471
- Mailing
- 616 NORTH RAILROAD AVENUE, TWIN CITY, GA 30471
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321992
- Employees
- 23
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.22 A01
- Issued
- Dec 8, 2025
- Penalty
- Initial $2,837 · Current $1,702 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. (a) In the cutting area of the production facility - On or about July 17, 2025, and at times prior to, the employer exposed employees to slip, trip and fire hazards, in that, the work areas and walking-working surfaces were not kept free of sawdust and scrap wood debris.
Recent events (2)
- — I (S) $1702.2
- — Z (S) $2837
1910.213 C01
- Issued
- Dec 8, 2025
- Penalty
- Initial $4,965 · Current $2,979 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. (a) In the cutting area of the production facility - On or about July 17, 2025, employees were exposed to struck-by hazards, in that, the Delta table saw was not equipped with a guard which completely enclosed the blade above the table and material being cut.
Recent events (2)
- — I (S) $2979
- — Z (S) $4965
1910.213 C02
- Issued
- Dec 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Handfed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. (a) In the cutting area of the production facility - On or about July 17, 2025, employees were exposed to struck-by hazards, in that, the Delta table saw was not equipped with a spreader to prevent material from binding on the blade and being thrown back at the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Dec 8, 2025
- Abate by
- Jan 27, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. (a) In the cutting area of the production facility - On or about July 17, 2025, employees were exposed to struck-by hazards, in that, the Delta table saw was not equipped with non-kickback fingers to help prevent material from being thrown back at the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 C01
- Issued
- Dec 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries. (a) In the production facility - On or about July 17, 2025, and at times prior to, the employer exposed employees to fire hazards, in that, the fire extinguisher locations were not identified for employees to readily access them when needed.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.334 A02 II
- Issued
- Dec 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the electrical equipment safe were made. (a) In the assembly area - On or about July 17, 2025, the employer exposed employees to electrical shock hazards, in that, a Milwaukee circular saw with a taped and damaged power cord was not removed from service and an employee used it before repairs were made to render it safe.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Twin City Quality Buildings, INC.
View Twin City Quality Buildings, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321992)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348380494.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.