TRENTON, NJ —
OSHA Inspection: MARSHALL INDUSTRIAL TECHNOLOGIES
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MARSHALL INDUSTRIAL TECHNOLOGIES in 529 SOUTH CLINTON AVENUE, TRENTON, NJ 08611 (NAICS 238290). OSHA activity number 348387721.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARSHALL INDUSTRIAL TECHNOLOGIES
- Site address
- 529 SOUTH CLINTON AVENUE
- City
- TRENTON
- State
- NJ
- ZIP
- 08611
- Mailing
- 529 SOUTH CLINTON AVENUE, TRENTON, NJ 08611
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238290
- Employees
- 116
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.253 B04 III
- Issued
- Dec 11, 2025
- Abate by
- Jan 8, 2026
- Penalty
- Initial $8,511 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii):Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour. a)Machine/fabrication shop: Oxygen cylinders were stored next to and chained together with acetylene gas cylinders without a noncombustible barrier measuring at least 5 feet high or a separation distance of at least 20 feet on or about 7/22/25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $4500
- — Z (S) $8511
1910.305 B02 I
- Issued
- Dec 11, 2025
- Penalty
- Initial $5,426 · Current $3,250 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i) All pull boxes, junction boxes, and fittings were not provided with covers identified for the purpose. a) Machine shop fabrication area next to garage door. A junction box containing live electrical wires that was located between the control panel for the garage door opener and a 4x4 outlet box did not have a cover, on or about 7/22/25.
Recent events (2)
- — I (S) $3250
- — Z (S) $5426
1910.305 G01 IV A
- Issued
- Dec 11, 2025
- Penalty
- Initial $5,426 · Current $3,250 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A):Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) Machine shop, fabrication area: An extension cord was used in lieu of permanent wiring to power the lathe, on or about 7/22/25.
Recent events (2)
- — I (S) $3250
- — Z (S) $5426
More inspections at Marshall Industrial Technologies
View Marshall Industrial Technologies's full OSHA safety record →
More inspections in this industry (NAICS 238290)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348387721.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.