PICKSTOWN, SD ·
OSHA Inspection: A-G-E CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of A-G-E CORPORATION in HIGHWAY 281 FORT RANDALL DAM, PICKSTOWN, SD 57367 (NAICS 237990). OSHA activity number 348399882.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A-G-E CORPORATION
- Site address
- HIGHWAY 281 FORT RANDALL DAM
- City
- PICKSTOWN
- State
- SD
- ZIP
- 57367
- Mailing
- 704 US HIGHWAY 14, FORT PIERRE, SD 57532
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237990
- Employees
- 100
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1926.251 E08 III
- Issued
- Jan 5, 2026
- Abate by
- Feb 5, 2026
- Penalty
- Initial $6,621 · Current $4,635 Reduced
General-duty citation text
29 CFR 1926.251(e)(8)(iii): Synthetic web slings were not immediately removed from service when any of the following conditions were present: snags, punctures, tears or cuts: (a)A-G-E Corporation at Fort Randall Dam-399 Powerhouse Road, Pickstown, SD 57367: On or about and at times prior to July 21, 2025, the employer did not ensure deficient synthetic web sling used with the Liebherr LTM 1220-5.2, Serial #070343 crane to lift and move a crane dolly was removed from service prior to use. This condition exposed employees to struck-by hazards due to rigging failure.
Recent events (2)
- · I (O) $4635
- · Z (S) $6621
1926.251 E01
- Issued
- Jan 5, 2026
- Abate by
- Feb 5, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.251(e)(1):The employer shall have each synthetic web sling marked or coded to show: (a)A-G-E Corporation at Fort Randall Dam-399 Powerhouse Road, Pickstown, SD 57367: On or about and at times prior to July 21, 2025, the employer did not ensure the synthetic web sling used with the Liebherr LTM 1220-5.2, Serial #070343 crane to lift and move a crane dolly was marked or coded prior to use. This condition exposed employees to struck-by hazards.
Recent events (2)
- · I (O) $0
- · Z (S) $0
1926.1412 D01
- Issued
- Jan 5, 2026
- Abate by
- Feb 5, 2026
- Penalty
- Initial $7,945 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1412(d)(1): A competent person must begin a visual inspection prior to each shift the equipment will be used, which must be completed before or during that shift. The inspection must consist of observation for apparent deficiencies. Taking apart equipment components and booming down is not required as part of this inspection unless the results of the visual inspection or trial operation indicate that further investigation necessitating taking apart equipment components or booming down is needed. Determinations made in conducting the inspection must be reassessed in light of observations made during operation. At a minimum the inspection must include (d)(1)(i) through (xiv): (a)A-G-E Corporation at Fort Randall Dam-399 Powerhouse Road, Pickstown, SD 57367: On or about and at times prior to July 21, 2025, the employer did not ensure that a visual inspection was conducted before or during the shift involving the Liebherr LTM 1220-5.2 Serial # 070343 mobile crane. This condition exposed employees to struck-by hazards in the event of a mechanical failure.
Recent events (2)
- · I (S) $0
- · Z (S) $7945
1926.1412 E03 I A
- Issued
- Jan 5, 2026
- Abate by
- Feb 5, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1412(d)(3)(i)[A]: The monthly inspection did not have items checked and documented and the result of the inspection: (a)A-G-E Corporation at Fort Randall Dam-399 Powerhouse Road, Pickstown, SD 57367: On or about and at times prior to July 21, 2025, the employer did not ensure monthly inspections were conducted on the Liebherr LTM 1220-5.2 Serial # 070343 mobile crane in accordance with 1926.1412 paragraph (d) prior to the shift or completed during the shift with items checked and documented to include the result of the inspection. This condition exposed employees and subcontractor employees to struck-by hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.1417 O01
- Issued
- Jan 5, 2026
- Abate by
- Feb 5, 2026
- Penalty
- Initial $9,268 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1417(o)(1): The equipment was operated in excess of its rated capacity: (a)A-G-E Corporation at Fort Randall Dam-399 Powerhouse Road, Pickstown, SD 57367: On or about and at times prior to July 21, 2025, the employer did not ensure that a Liebherr LTM 1220-5.2, Serial # 070343, mobile crane was operated within the recommended specifications of the crane load chart based on the configuration of the crane. The crane attempted to lift and slew a crane dolly outside of the recommended radius of the Liebherr load chart for the configuration involving zero outriggers and no counterweights causing the crane to collapse. This condition exposed the operator to caught-in and struck-by injuries involving the loss of stability and crane collapse.
Recent events (2)
- · I (S) $0
- · Z (S) $9268
1926.1417 O02
- Issued
- Jan 5, 2026
- Abate by
- Feb 5, 2026
- Penalty
- Initial $0 · Current $6,488
General-duty citation text
29 CFR 1926.1417(o)(2): The operator must not be required to operate the equipment in a manner that would violate paragraph (o)(1) of this section: (a)A-G-E Corporation at Fort Randall Dam-399 Powerhouse Road, Pickstown, SD 57367: On or about and at times prior to July 21, 2025, the employer did not ensure the crane operator was operating the crane within the manufacturer?s specified 14-foot radius with zero outriggers, no counterweight, and maximum capacity of 23,700 lbs. while initially lifting the boom dolly over the rear of the crane for the purpose of dolly relocation. This condition exposed the employees to caught-in and struck-by hazards when the crane was required to be operated outside of load chart requirements during the initial lift at the rear of the crane.
Recent events (2)
- · I (S) $6488
- · Z (S) $0
More inspections in this industry (NAICS 237990)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348399882.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.