Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WHITMAN TOOL & DIE COMPANY, INCORPORATED

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of WHITMAN TOOL & DIE COMPANY, INCORPORATED in 72 RAYNOR AVENUE, WHITMAN, MA 02382 (NAICS 332119). OSHA activity number 348402496.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Whitman Tool & DIE Company, Incorporated — free Get an email when a new federal OSHA severe-injury report for Whitman Tool & DIE Company, Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
72 RAYNOR AVENUE
City
WHITMAN
State
MA
ZIP
02382
Mailing
PO BOX 248, WHITMAN, MA 02382
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332119
Employees
23
Ownership type
A

4 citations on file for this inspection.

1910.147 C01

Serious Gravity 10 1 instance 18 exposed
Issued
Dec 11, 2025
Abate by
Jan 14, 2026
Penalty
Initial $4,965 · Current $2,483 Reduced
29 CFR  1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative   Location:  Facility  Instance A:   Company employees were not locking out machinery such as power presses prior to performing servicing tasks such as die setting.  Instance B:   The company was not performing inspections of LOTO procedures at least annually.
Recent events (2)
  • — I (S) $2482.5
  • — Z (S) $4965

1910.212 A01

Serious Gravity 5 4 instances 18 exposed
Issued
Dec 11, 2025
Abate by
Jan 22, 2026
Penalty
Initial $3,015 · Current $1,508 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Location:  Press Rooms  Instance A:  The Dallas Industries coil straightener for the # 14 Bliss C-150 press was unguarded. Instance B:  Coil unwinding mandrels were unguarded - including mandrels serving Presses 14, 17, 28 and 33. Instance C:  VMX 50 vertical milling machine's front door interlock was inoperable. Instance D:  the lowermost of 3 chain and sprockets on the # 39 V & O Press was unguarded.
Recent events (2)
  • — I (S) $1507.5
  • — Z (S) $3015

1910.212 A04

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 11, 2025
Abate by
Jan 22, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.212(a)(4):Revolving drum(s), barrel(s), or container(s) were not guarded by enclosure(s) which were interlocked with the drive mechanism so that the barrel(s), drum(s), or container(s) could not revolve unless the enclosure(s) were in place:  Location:  Tumbler Room  The tumbler in the far corner of the Tumbler Room was unguarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.29 B03

Other-than-serious 1 instance 1 exposed
Issued
Dec 11, 2025
Penalty
Initial $603 · Current $302 Reduced
29 CFR  1904.29(b)(3):The employer did not enter each recordable injury or illness on the OSHA 300 Log and 301 Incident Report within seven (7) calendar days of receiving information that a recordable injury or illness has occurred.  Location:  Facility Press Rooms  The employer did not record a case of occupational hearing loss.
Recent events (2)
  • — I (O) $301.5
  • — Z (O) $603

View Whitman Tool & DIE Company, Incorporated's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348402496.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.