IXONIA, WI —
OSHA Inspection: G & V MACHINE CO., INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of G & V MACHINE CO., INC. in N8100 INDUSTRIAL DRIVE, IXONIA, WI 53036 (NAICS 332710). OSHA activity number 348431651.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G & V MACHINE CO., INC.
- Site address
- N8100 INDUSTRIAL DRIVE
- City
- IXONIA
- State
- WI
- ZIP
- 53036
- Mailing
- N8100 INDUSTRIAL DRIVE, IXONIA, WI 53036
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 130
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 19, 2025
- Penalty
- Initial $9,457 · Current $6,029 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about August 12, 2025, the employer failed to ensure that one or more methods of machine guarding protected operators of the Sharp-1860L lathe machine from rotating parts such as the chuck during the operating cycle.
Recent events (2)
- — I (S) $6029
- — Z (S) $9457
1910.212 A03 II
- Issued
- Dec 19, 2025
- Abate by
- Jan 13, 2026
- Penalty
- Initial $16,550 · Current $7,537 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: On or about August 8, 2025, the employer failed to ensure the point of operation guards were designed and constructed to prevent the operator from having any part of their body in the danger zone during the operating cycle of the horizontal band saw in the tool making area.
Recent events (2)
- — I (S) $7537
- — Z (S) $16550
1910.147 C06 I
- Issued
- Dec 19, 2025
- Abate by
- Jan 13, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about August 12, 2025, the employer did not ensure that periodic inspections of the energy control procedures for the MAZAK CNC (Model 308122) were conducted on an annual basis to ensure the procedures and the requirements of this standard were followed. b) On or about August 12, 2025, the employer did not ensure that periodic inspections of the energy control procedures for the DOOSAN PUMA VT1100 were conducted on an annual basis to ensure the procedures and the requirements of this standard were followed.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 II
- Issued
- Dec 19, 2025
- Abate by
- Jan 13, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections have been performed: a) On or about August 12, 2025, the employer did not certify that the periodic inspections have been performed for the MAZAK CNC (Model 308122). b) On or about August 12, 2025, the employer did not certify that the periodic inspections have been performed for the DOOSAN PUMA VT1100.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at G & V Machine CO., INC.
View G & V Machine CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348431651.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.