NORTH CONWAY, NH —
OSHA Inspection: UNITED CARPENTRY INC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of UNITED CARPENTRY INC in BLACK DIAMOND ROAD, NORTH CONWAY, NH 03860 (NAICS 238130). OSHA activity number 348436916.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNITED CARPENTRY INC
- Site address
- BLACK DIAMOND ROAD
- City
- NORTH CONWAY
- State
- NH
- ZIP
- 03860
- Mailing
- 73 BROW STREET, FALL RIVER, MA 02721
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.501 B13
- Issued
- Sep 16, 2025
- Penalty
- Initial $3,972 · Current $3,972
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): Site - On or about June 23, 2025, an employee was standing on the top of the front external wall top plate and was exposed to falling approximately 24 feet to the ground below.
Recent events (2)
- — I (S) $3972
- — Z (S) $3972
1926.501 B14
- Issued
- Sep 16, 2025
- Penalty
- Initial $2,838 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, is not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system. 2nd and 3rd Floors - On or about June 23, 2025, an employees were working near wall openings for doors and windows and were exposed to falling up to approximately 16 feet to the ground below.
Recent events (2)
- — I (S) $0
- — Z (S) $2838
1926.1052 C12
- Issued
- Sep 16, 2025
- Penalty
- Initial $2,270 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1052(c)(12): Unprotected sides and edges of stairway landings were not provided with guardrail systems that meet the criteria contained in Subpart M of 29 CFR 1926. Site - On or about June 23, 2025, the stairway landings between the first floor and third floor of the building were not equipped with guardrails.
Recent events (2)
- — I (S) $0
- — Z (S) $2270
1926.1052 C01 II
- Issued
- Sep 16, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stair rail system along each unprotected side or edge. Site - On or about June 23, 2025, the stairway from the first floor to the third floor of the building was not equipped with a stair rail system along the unprotected edges.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L06
- Issued
- Sep 16, 2025
- Abate by
- Oct 20, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): Site - On or about June 23, 2025, the employer did not certify that the operator of the JCB 510-56 all-terrain forklift had been trained.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at United Carpentry INC
View United Carpentry INC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348436916.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.