MONMOUTH JUNCTION, NJ —
OSHA Inspection: BURNS CONSTRUCTION MAINTENANCE LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BURNS CONSTRUCTION MAINTENANCE LLC in 4154 U.S. RTE 1, MONMOUTH JUNCTION, NJ 08852 (NAICS 811310). OSHA activity number 348439639.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURNS CONSTRUCTION MAINTENANCE LLC
- Site address
- 4154 U.S. RTE 1
- City
- MONMOUTH JUNCTION
- State
- NJ
- ZIP
- 08852
- Mailing
- 1 GOLD MINE ROAD, ROXBURY TOWNSHIP, NJ 07836
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 C01
- Issued
- Sep 19, 2025
- Abate by
- Oct 16, 2025
- Penalty
- Initial $4,256 · Current $2,979 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) 4154 U.S. Route 1 Monmouth Junction, NJ 08852 Shoprite loading dock area On or about 8/14/25 and thereafter, employee(s) were provided and required to use N-95 face mask, for which the employer did not have a written program for administering the use of respiratory protection in the workplace. The employer required employees to wear N-95 face mask while operating Cantek LSP-85DHC double surface planer, which creates polymer and plastic debris. Hazard noted on or about 08/14/25
Recent events (2)
- — I (S) $2979.2
- — Z (S) $4256
1910.134 E01
- Issued
- Sep 19, 2025
- Abate by
- Oct 16, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) 4154 U.S. Route 1 Monmouth Junction, NJ 08852 Shoprite loading dock area On or about 8/14/25 and thereafter, employee(s) were provided and required to use N-95 face mask, for which the employer did not have a written program for administering the use of respiratory protection in the workplace. The employer required employees to wear N-95 face mask while operating Cantek LSP-85DHC double surface planer, but never got employees medically cleared. Hazard noted on or about 08/14/25 Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 A03 I
- Issued
- Sep 19, 2025
- Abate by
- Oct 16, 2025
- Penalty
- Initial $4,256 · Current $2,979 Reduced
General-duty citation text
29 CFR 1910.147(a)(3)(i):The employer failed to establish a program and utilize procedures for affixing appropriate lockout devices or tagout devices to energy isolating devices and to otherwise disable machines or equipment to prevent unexpected energization, startup or release of stored energy in order to prevent injury to employees. A) 4154 U.S. Route 1 Monmouth Junction, NJ 08852 Shoprite loading dock area The employer failed to generate and implement a lockout/tagout program. This condition exposed employees to amputation hazards. Hazard noted on or about 08/14/25
Recent events (2)
- — I (S) $2979.2
- — Z (S) $4256
1910.147 C07 I
- Issued
- Sep 19, 2025
- Abate by
- Oct 16, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: A) 4154 U.S. Route 1 Monmouth Junction, NJ 08852 Shoprite loading dock area The employer failed to provide Lockout/Tagout training to employees that may be required to work on and or service equipment that would need to be deenergized in order to properly work on the equipment safely. This condition exposed employees to amputation hazards. Hazard noted on or about 08/14/25
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Burns Construction Maintenance LLC
View Burns Construction Maintenance LLC's full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348439639.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.