Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROTARY PRODUCTS INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of ROTARY PRODUCTS INC. in 9982 U.S. 42, ASHLEY, OH 43003 (NAICS 332999). OSHA activity number 348450719.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rotary Products INC. — free Get an email when a new federal OSHA severe-injury report for Rotary Products INC. is published. One employer, no account, unsubscribe in one click.
Site address
9982 U.S. 42
City
ASHLEY
State
OH
ZIP
43003
Mailing
9982 U.S. 42, ASHLEY, OH 43003
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
30
Ownership type
A

5 citations on file for this inspection.

1910.213 H01

Serious Gravity 10 1 instance 4 exposed
Issued
Sep 12, 2025
Abate by
Oct 17, 2025
Penalty
Initial $13,902 · Current $6,951 Reduced
29 CFR  1910.213(h)(1):The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.  a. On or before July 30, 2025, the employer did not ensure that the lower portion of the blade of the 16" Dewalt radial arm saw, Serial #6523001, was guarded resulting in an employee's fingers being amputated while engaging in cutting operations.
Recent events (2)
  • — I (S) $6951
  • — Z (S) $13902

1910.1030 C01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 12, 2025
Abate by
Oct 17, 2025
Penalty
Initial $7,944 · Current $3,972 Reduced
29 CFR  1910.1030(c)(1)(i):Each employer having an employee(s) with occupational exposure as defined by paragraph (b) of this section shall establish a written Exposure Control Plan designed to eliminate or minimize employee exposure.  a. On or about July 30, 2025, the employer did not develop and implement an exposure control plan for employees exposed to blood while cleaning up after an employee injury.
Recent events (2)
  • — I (S) $3972
  • — Z (S) $7944

1910.1030 F01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 12, 2025
Abate by
Oct 17, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1030(f)(1)(i): The employer shall make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure, and post-exposure evaluation and follow-up to all employees who have had an exposure incident.   a. On or about July 30, 2025, the employer did not offer the Hepatitis B vaccine to employees exposed to blood while cleaning up after an employee injury.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1030 G02 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 12, 2025
Abate by
Oct 17, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1030(g)(2)(i): The employer shall train each employee with occupational exposure in accordance with the requirements of this section. Such training must be provided at no cost to the employee and during working hours. The employer shall institute a training program and ensure employee participation in the program.   a. On or about July 30, 2025, the employer did not develop and implement a training program for employees exposed to blood while cleaning up after an employee injury.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.39 A02

Other-than-serious 1 instance 30 exposed
Issued
Sep 12, 2025
Penalty
Initial $9,931 · Current $4,966 Reduced
29 CFR  1904.39(a)(2):Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.  a. On or about July 30, 2025, the employer did not report a workplace amputation injury to OSHA within 24 hours.  The employer reported the injury on August 13, 2025.
Recent events (2)
  • — I (O) $4965.5
  • — Z (O) $9931

View Rotary Products INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348450719.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.