SCOTTSBORO, AL ·
OSHA Inspection: SAWGRASS SUSTAINABLE, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SAWGRASS SUSTAINABLE, LLC in 132 WOODS COVE ROAD, SCOTTSBORO, AL 35769 (NAICS 423930). OSHA activity number 348455205.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAWGRASS SUSTAINABLE, LLC
- Site address
- 132 WOODS COVE ROAD
- City
- SCOTTSBORO
- State
- AL
- ZIP
- 35769
- Mailing
- 132 WOODS COVE ROAD, SCOTTSBORO, AL 35769
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 25
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 28, 2026
- Abate by
- Feb 24, 2026
- Penalty
- Initial $9,268 · Current $6,488 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about August 14, 2025, on the production floor; employee(s) operated the Line One Vecoplan Conveyor machine without machine guarding in place at the rotating pulley mechanisms underneath conveyor one while dumping recycled plastic material onto the conveyor belt inside the building. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE action worksheet), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $6487.6
- · Z (S) $9268
1910.219 C02 I
- Issued
- Jan 28, 2026
- Abate by
- Feb 24, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: (a) On or about August 14, 2025, on the production floor; employee(s) operated the Line One Vecoplan Conveyor machine without adequate guarding for horizontal shaft(s). In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE action worksheet), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 E03 I
- Issued
- Jan 28, 2026
- Abate by
- Feb 24, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m): (a) On or about August 14, 2025, on the production floor; employee(s) operated the Line One Vecoplan Conveyor machine without adequate guarding for conveyor belt(s). In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE action worksheet), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 423930)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348455205.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.