Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WARREN GENERAL HOSPITAL

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of WARREN GENERAL HOSPITAL in 2 W CRESCENT PARK, WARREN, PA 16365 (NAICS 622110). OSHA activity number 348467143.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Warren General Hospital — free Get an email when a new federal OSHA severe-injury report for Warren General Hospital is published. One employer, no account, unsubscribe in one click.
Site address
2 W CRESCENT PARK
City
WARREN
State
PA
ZIP
16365
Mailing
2 W CRESCENT PARK, WARREN, PA 16365
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Last modified
Data loaded
NAICS code
622110
Employees
700
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 10 exposed
Issued
Dec 18, 2025
Abate by
May 15, 2026
Penalty
Initial $12,059 · Current $7,500 Reduced
29 CFR  1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  A.) Warren General Hospital, On or about 8/10/25 and times prior thereto: Lockout Tagout/Energy Control procedures were not developed for equipment including but limited to, Pump 18.   ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below).  This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement
Recent events (3)
  • — P (S) $7500
  • — I (S) $7500
  • — Z (S) $12059

1910.147 D

Serious Gravity 5 1 instance 10 exposed
Issued
Dec 18, 2025
Abate by
Jan 15, 2026
Penalty
Initial $12,059 · Current $7,500 Reduced
29 CFR  1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):  A.) Warren General Hospital, On or about 8/10/25and times prior thereto: Employees did not lockout and relieve stored hydraulic energy prior to performing preventative maintenance work on equipment including but not limited to pump 18.  An employees fingers contacted a spinning propellor resulting in a fingertip avulsion and possible amputation.   ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below).  This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $7500
  • — Z (S) $12059

1910.147 E03

Other-than-serious 1 instance 10 exposed
Issued
Dec 18, 2025
Abate by
Feb 20, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.147(e)(3): 29 CFR  1910.147(e)(3): When the authorized employee who applied the lockout or tagout device was not available to remove it, and the device removal is completed under the direction of the employer, specific procedures and training were not developed, documented and incorporated into the employer's energy control program:   A.) Warren General Hospital, On or about 8/10/25and times prior thereto: employees performed servicing and maintenance tasks on equipment including but not limited to, pump 18.  The Employer had not developed and documented a specific procedure for use during removal of a lockout device by someone other than the authorized employee who applied it.  ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below).  This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.147 C06 II

Other-than-serious 1 instance 10 exposed
Issued
Dec 18, 2025
Abate by
May 15, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(6)(ii): The employer did not certify that the periodic inspections have been performed:   A.) Warren General Hospital, On or about 8/10/25and times prior thereto: A Periodic inspection was being conducted of the general energy control procedure.  A certification containing the machine, equipment, or employees involved in the inspection was not maintained. Employees were performing service and maintenance activities on equipment including, but not limited to pump 18.  ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below).  This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (3)
  • — P (O) $0
  • — I (O) $0
  • — Z (O) $0

View Warren General Hospital's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348467143.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.