Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PHOENIX STAINLESS, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of PHOENIX STAINLESS, LLC in 117315 FORWARD STREET, STRATFORD, WI 54484 (NAICS 332999). OSHA activity number 348492794.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Phoenix Stainless, LLC — free Get an email when a new federal OSHA severe-injury report for Phoenix Stainless, LLC is published. One employer, no account, unsubscribe in one click.
Site address
117315 FORWARD STREET
City
STRATFORD
State
WI
ZIP
54484
Mailing
117315 FORWARD STREET, STRATFORD, WI 54484
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
20
Ownership type
A

6 citations on file for this inspection.

1910.95 D01

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Sep 26, 2025
Abate by
Nov 17, 2025
Penalty
Initial $2,838 · Current $0 Reduced

Hazardous substances 8111

29 CFR  1910.95(d)(1): When information indicates that any employee's exposure may equal or exceed an 8-hour time-weighted average (TWA) of 85 decibels, the employer shall develop and implement a monitoring program:  During the week of September 1, 2025, at a facility located at 117315 Forward Street in Stratford, Wisconsin; the employer did not develop and implement a noise monitoring program when information indicated that employees' exposure to noise may equal or exceed an 8-hour TWA of 85 decibels. The employer provided hearing protection for employees working in the metal fabrication shop generally, and for an employee grinding inside the confined space of a stainless-steel tank.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2838

1910.252 B04 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 26, 2025
Abate by
Oct 27, 2025
Penalty
Initial $2,838 · Current $1,418 Reduced
29 CFR  1910.252(b)(4)(iv): Where a welder must enter a confined space through a manhole or other small opening, means shall be provided for quickly removing him in case of emergency. When safety belts and lifelines are used for this purpose they shall be so attached to the welder's body that his body cannot be jammed in a small exit opening. An attendant with a preplanned rescue procedure shall be stationed outside to observe the welder at all times and be capable of putting rescue operations into effect:  During the week of September 1, 2025, at a facility located at 117315 Forward Street in Stratford, Wisconsin; A Welder/Fabricator employee entering the confined space of a tank through a 20-inch diameter manway, to grind on welded seams, was not provided for quick removal in case of emergency. The employee entering the tank was not provided with body harness and lifeline for quick removal from the confined space. The employer did not ensure an attendant with a preplanned rescue procedure was stationed outside the tank to observe the welder employee at all times.
Recent events (2)
  • — I (S) $1418
  • — Z (S) $2838

1910.1026 D01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 26, 2025
Abate by
Nov 17, 2025
Penalty
Initial $2,838 · Current $1,418 Reduced
29 CFR  1910.1026(d)(1): Each employer who has a workplace or work operation covered by this section shall determine the 8-hour time-weighted average (TWA) exposure for each employee exposed to chromium (VI). This determination shall be made in accordance with either paragraph (d)(2) or paragraph (d)(3) of this section:  During the week of September 1, 2025, and after, at a facility located at 117315 Forward Street in Stratford, Wisconsin; the employer had not determined the 8-hour TWA exposure for each employee exposed to chromium (VI) during welding operations on stainless steel.
Recent events (2)
  • — I (S) $1418
  • — Z (S) $2838

1910.1026 L01 II

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Sep 26, 2025
Abate by
Oct 27, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1026(l)(1)(ii): In classifying the hazards of chromium (VI) at least the following hazards are to be addressed: Cancer, eye irritation, and skin sensitization:  On September 10, 2025, at a facility located at 117315 Forward Street in Stratford, Wisconsin; the employer's hazard communication in classifying workplace hazards did not include chromium (VI) and did not address at least the hazards of cancer, eye irritation and skin sensitization when employees were exposed to chromium (VI) during welding on stainless steel.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1026 L02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 26, 2025
Abate by
Oct 27, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1026(l)(2)(i): The employer shall ensure that each employee can demonstrate knowledge of at least the contents of this section and the purpose and a description of the medical surveillance program required by paragraph (k) of this section:  On September 10, 2025, at a facility located at 117315 Forward Street in Stratford, Wisconsin; the employer did not ensure that employees exposed to chromium (VI) when TIG and MIG welding on stainless steel, could demonstrate the knowledge of the contents of this section and the purpose and a description of the medical surveillance program for chromium (VI).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 D02

Other-than-serious 1 instance 3 exposed
Issued
Sep 26, 2025
Abate by
Oct 27, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.  On September 10, 2025, at a facility located at 117315 Forward Street in Stratford, Wisconsin; the employer did not verify through written certification that a hazard assessment for the use of PPE had been conducted when employees were exposed to hazards that required equipment such as but not limited to safety glasses, hearing protection, welding helmets and clothing, and gloves.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Phoenix Stainless, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348492794.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.