ENGLISHTOWN, NJ —
OSHA Inspection: ELITE GRANITE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELITE GRANITE in 28 HARRISON AVE, ENGLISHTOWN, NJ 07726 (NAICS 423320). OSHA activity number 348511346.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELITE GRANITE
- Site address
- 28 HARRISON AVE
- City
- ENGLISHTOWN
- State
- NJ
- ZIP
- 07726
- Mailing
- 28 HARRISON AVE, ENGLISHTOWN, NJ 07726
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423320
- Employees
- 9
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.178 A04
- Issued
- Jan 16, 2026
- Abate by
- Feb 12, 2026
- Penalty
- Initial $2,837 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:( a) Shop: The employer used a power industrial truck equipped with a non- factory installed attachment to load and unload granite material. On or about 09/18/2025 NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $1000
- — Z (S) $2837
1910.305 J02 IV
- Issued
- Jan 16, 2026
- Penalty
- Initial $3,015 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.305(j)(2)(iv):A receptacle installed in a wet or damp location was not suitable for the location: a) Production area: Employees in the production area were using receptacles that powered grinders and polishers for wet grinding and polishing countertops which were not designed for use in wet locations.
Recent events (2)
- — I (S) $3000
- — Z (S) $3015
1910.147 C01
- Issued
- Jan 16, 2026
- Abate by
- Feb 12, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) Production area: The employer failed to develop and implement a lockout program, including machine-specific energy control procedures and employee training, for employees performing a task of changing the blade on the CNC machine, GMM Stone Machinery Serial # 5975. This condition was observed on or about 9/18/25 NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Elite Granite
View Elite Granite's full OSHA safety record →
More inspections in this industry (NAICS 423320)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348511346.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.