AVON, MA —
OSHA Inspection: MATERIA MILLWORK LLC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of MATERIA MILLWORK LLC in 254 BODWELL STREET UNIT B, AVON, MA 02322 (NAICS 337110). OSHA activity number 348522467.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MATERIA MILLWORK LLC
- Site address
- 254 BODWELL STREET UNIT B
- City
- AVON
- State
- MA
- ZIP
- 02322
- Mailing
- 254 BODWELL STREET UNIT B, AVON, MA 02322
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 5
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 B
- Issued
- Mar 10, 2026
- Penalty
- Initial $2,128 · Current $1,064 Reduced
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Location: Workshop On or about September 29, 2025, the Ridgid drill press was not anchored to the floor to prevent walking of the drill press.
Recent events (2)
- — I (O) $1064
- — Z (S) $2128
1910.213 C01
- Issued
- Mar 10, 2026
- Penalty
- Initial $3,547 · Current $1,774 Reduced
General-duty citation text
29 CFR 1910.213(c)(1):Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: Location: Carpentry Shop On or about September 24, 2025 the table saw did not had a hood guard.
Recent events (2)
- — I (S) $1773.5
- — Z (S) $3547
1910.213 C02
- Issued
- Mar 10, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2):Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Location: Carpentry Shop On or about September 24, 2025, the table saw did not have a splitter on the saw to prevent anti kickbacks.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Mar 10, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3):Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Location: Carpentry Shop On or about September 24, 2025, the table saw was not equipped with anti kickback fingers to to prevent anti kickbacks.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G01
- Issued
- Mar 10, 2026
- Abate by
- Apr 28, 2026
- Penalty
- Initial $2,128 · Current $1,064 Reduced
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: Location Carpenter Shop On or about September 24, 2025, the employer did not maintain clear access to the electrical panels.
Recent events (2)
- — I (O) $1064
- — Z (S) $2128
1910.37 A04
- Issued
- Mar 10, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(4):Safeguard(s) designed to protect employees during an emergency (e.g., sprinkler systems, alarm systems, fire doors, exit lighting), were not in proper working order at all times: Location: Carpenter Shop On or about September 24, 2025, emergency exit light leading to the outside was not operational.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E01
- Issued
- Mar 10, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(1):The employer shall be responsible for the inspection, maintenance and testing of all portable fire extinguishers in the workplace: Location: Carpenter shop On or about September 24, 2025, the employer did not inspect fire extinguishers in the carpenter shop.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Materia Millwork LLC
View Materia Millwork LLC's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348522467.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.