BALSAM LAKE, WI —
OSHA Inspection: DANIEL MILLER
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DANIEL MILLER in 1514 190TH AVENUE, UNIT 3, BALSAM LAKE, WI 54810 (NAICS 238130). OSHA activity number 348530262.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DANIEL MILLER
- Site address
- 1514 190TH AVENUE, UNIT 3
- City
- BALSAM LAKE
- State
- WI
- ZIP
- 54810
- Mailing
- 1314 300TH AVENUE, FREDERIC, WI 54837
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1903.19 C01
- Issued
- Mar 5, 2026
- Abate by
- Apr 13, 2026
- Penalty
- Initial $319 · Current $319
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: (a) Citation 1, Item 1a; a serious violation of 29 CFR 1926.501(b)(1) with an abatement date of February 11, 2026. (b) Citation 1, Item 1b; a serious violation of 29 CFR 1926.503(a)(1) with an abatement date of February 11, 2026. (c) Citation 1, Item 2a; a serious violation of 29 CFR 1926.1053(b)(13) with an abatement date of February 4, 2026. (d) Citation 1, Item 2b; a serious violation of 29 CFR 1926.1060(a)(1)(iii) with an abatement date of February 4, 2026.
Recent events (1)
- — Z (O) $319
1903.19 D01
- Issued
- Mar 5, 2026
- Abate by
- Apr 13, 2026
- Penalty
- Initial $319 · Current $319
General-duty citation text
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required: (a) Citation 1, Item 1a; a serious violation of 29 CFR 1926.501(b)(1) with an abatement date of February 11, 2026. (b) Citation 1, Item 1b; a serious violation of 29 CFR 1926.503(a)(1) with an abatement date of February 11, 2026.
Recent events (1)
- — Z (O) $319
1926.501 B01
- Issued
- Jan 21, 2026
- Abate by
- Feb 11, 2026
- Penalty
- Initial $3,972 · Current $3,972
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: (a) North end of building; On or about September 25, 2025, a means of fall protection was not used during truss setting and bracing activities, while two workers stood on wall top plates and a third worker stood on the bottom chord of roof trusses at heights of greater than 8-feet above the concrete slab.
Recent events (1)
- — Z (S) $3972
1926.503 A01
- Issued
- Jan 21, 2026
- Abate by
- Feb 11, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards: (a) North end of building; On or about September 25, 2025, and dates prior, fall hazard awareness and/or fall prevention training was not provided to each employee before they performed elevated truss setting and bracing activities at heights greater than 8-feet above the concrete slab.
Recent events (1)
- — Z (S) $0
1926.1053 B13
- Issued
- Jan 21, 2026
- Abate by
- Feb 4, 2026
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1926.1053(b)(13): The top or step of a stepladder was used as a step: (a) North end of building; On or about September 25, 2025, the top step of two, multi-position ladders setup as self-supporting ladders (A-frame, stepladders) were used to access the bottom chord of trusses and top plates of walls during truss setting and bracing operations.
Recent events (1)
- — Z (S) $2838
1926.1060 A01 III
- Issued
- Jan 21, 2026
- Abate by
- Feb 4, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a)(1)(iii): The employer did not ensure that each employee using ladders and/or stairways had been trained by a competent person in the proper construction, use, placement, and care in handling the ladders and/or stairways: (a) Throughout the establishment; On or about September 25, 2025, and dates prior, the employer did not train each employee how to setup and use ladders before they were allowed to use aluminum, multi-ladders, setup as stepladders to gain access to the bottom chord of trusses and top plates of walls during truss setting and bracing operations.
Recent events (1)
- — Z (S) $0
More inspections at Daniel Miller
View Daniel Miller's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348530262.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.