Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MJZ SERVICES LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MJZ SERVICES LLC in 19 CLINTON AVE, ALBANY, NY 12207 (NAICS 238320). OSHA activity number 348535949.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MJZ Services LLC — free Get an email when a new federal OSHA severe-injury report for MJZ Services LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MJZ SERVICES LLC
Site address
19 CLINTON AVE
City
ALBANY
State
NY
ZIP
12207
Mailing
141 FRELINGHUYSEN AVENUE, NEWARK, NJ 07114
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238320
Employees
28
Ownership type
A

6 citations on file for this inspection.

1926.21 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 20, 2026
Abate by
Mar 26, 2026
Penalty
Initial $6,620 · Current $6,620
29 CFR  1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:  a) Worksite, 19 Clinton Ave, Albany, NY 12207, fire escape - an employee was climbing on the guardrail of a SJ8841 SkyJack scissor lift to access the landing tread of the fire escape approximately 30-feet above the ground. The employee was not instructed in the recognition and avoidance of unsafe fall hazards.
Recent events (1)
  • — Z (S) $6620

1926.303 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 20, 2026
Abate by
Mar 26, 2026
Penalty
Initial $8,276 · Current $8,276
29 CFR  1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section:   a) Worksite, 19 Clinton Ave, Albany, NY 12207, fire escape - On or about October 1, 2025, an employee was operating a Dewalt 4 1/2in Angle Grinder Type 15A - with a PFX #80138 Grinding Wheel mounted on the spindle to clean paint and rust from the fire escape stairs that did not have a guard.
Recent events (1)
  • — Z (S) $8276

1926.404 B01 III C

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 20, 2026
Abate by
Mar 26, 2026
Penalty
Initial $6,620 · Current $6,620
29 CFR  1926.404(b)(1)(iii)(C): Where an assured equipment grounding conductor program was being utilized, the employer did not ensure that each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, were visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage:  a) Worksite, 19 Clinton Ave, Albany, NY 12207, fire escape - On or about October 1, 2025, an employee was operating a Dewalt 4 1/2in Angle Grinder Model No. DWE402 Type 15A - with a PFX #80138 Grinding Wheel mounted on the spindle to clean paint and rust from the fire escape stairs and the sheath of the power cord was cut and damaged.
Recent events (1)
  • — Z (S) $6620

1926.405 G02 IV

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 20, 2026
Abate by
Mar 26, 2026
Penalty
Initial $4,965 · Current $4,965
29 CFR  1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  a) Worksite, 19 Clinton Ave, Albany, NY 12207, fire escape - On or about October 1, 2025, an employee was operating a Dewalt 4 1/2in Angle Grinder  Model No. DWE402 Type 15A - with a PFX #80138 Grinding Wheel mounted on the spindle to clean paint and rust from the fire escape stairs and was exposed to electrical shock hazards. The  flexible cord had exposed wires and did not have strain relief.
Recent events (1)
  • — Z (S) $4965

1926.451 F01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 20, 2026
Abate by
Mar 26, 2026
Penalty
Initial $8,276 · Current $8,276
29 CFR  1926.451(f)(1): Scaffold and/or scaffold components were loaded in excess of their maximum intended loads or rated capacities, whichever was less:   a) Worksite, 19 Clinton Ave, Albany, NY 12207, fire escape - On or about October 1, 2025, an employee was climbing on the guardrail of a SJ8841 SkyJack scissor lift to access the landing tread of the fire escape approximately 30-feet above the ground. The guardrail was loaded in excess of its rated capacity.
Recent events (1)
  • — Z (S) $8276

1926.501 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 20, 2026
Penalty
Initial $8,276 · Current $8,276
29 CFR  1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a) Worksite, 19 Clinton Ave, Albany, NY 12207, fire escape - an employee was climbing on the guardrail of a SJ8841 SkyJack scissor lift to access the landing tread of the fire escape approximately 30-feet above the ground. The employee was not protected from falling by a guardrail system, safety net system or a personal fall arrest system.
Recent events (1)
  • — Z (S) $8276

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348535949.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.