MOUNDVILLE, AL ·
OSHA Inspection: SON RISE MECHANICAL, INC.
Fatality or catastrophe inspection · Safety discipline
At a glance
On , OSHA opened a fatality or catastrophe safety inspection of SON RISE MECHANICAL, INC. in 2500 GULF STATES PARKWAY, MOUNDVILLE, AL 35474 (NAICS 321113). OSHA activity number 348559204.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SON RISE MECHANICAL, INC.
- Site address
- 2500 GULF STATES PARKWAY
- City
- MOUNDVILLE
- State
- AL
- ZIP
- 35474
- Mailing
- 15701 COUNTY ROAD 32, AKRON, AL 35441
What kind of inspection was it?
- Inspection type
- Fatality or catastrophe (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 4
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.9 B
- Issued
- Feb 23, 2026
- Abate by
- Mar 23, 2026
- Penalty
- Initial $4,965 · Current $3,722 Reduced
General-duty citation text
1910.9(b)The employer did not train each affected employee in the manner required by the standard: a) At 2500 Gulf States Pkwy, Moundville, AL 35474, on or about October 18, 2025, in the sawmill, employees were exposed to struck by hazards while working beneath suspended loads. Employees were not trained appropriately on the safe use and limitations of lever hoists (comealongs).
Recent events (2)
- · I (O) $3722
- · Z (S) $4965
1910.23 B08
- Issued
- Feb 23, 2026
- Penalty
- Initial $2,270 · Current $1,702 Reduced
General-duty citation text
29 CFR 1910.23(b)(8):29 CFR 1910.23(b)(8): The employer did not ensure that ladders are used only for the purposes for which they were designed. a) At 2500 Gulf States Pkwy, Moundville, AL 35474, on or about October 18, 2025, in the sawmill, employees were utilizing a portable A-frame ladder for a purpose for which it was not designed.
Recent events (2)
- · I (O) $1702
- · Z (S) $2270
1910.23 C11
- Issued
- Feb 23, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(c)(11): The employer did not ensure that portable ladders used to gain access to an upper landing surface that have side rails that extend at least 3 feet (0.9 m) above the upper landing surface. a) At 2500 Gulf States Pkwy, Moundville, AL 35474, on or about October 18, 2025, in the sawmill, employees were utilizing a portable ladder to access an upper landing surface that did not have side rails extended at least three feet above the upper landing surface.
Recent events (2)
- · I (O) $0
- · Z (S) $0
1910.147 C02 I
- Issued
- Feb 23, 2026
- Abate by
- Mar 23, 2026
- Penalty
- Initial $16,550 · Current $12,408 Reduced
General-duty citation text
29 CFR 1910.147(c)(2)(i):Where an energy isolating device was not capable of being locked out, the employer's energy control program under 29 CFR 1910.147(c)(1) did not utilize a tagout system: a) At 2500 Gulf States Pkwy, Moundville, AL 35474, on or about October 18, 2025, in the sawmill, a lever hoist which was not capable of being locked out was used as an energy isolating device without being integrated into a tagout system.
Recent events (2)
- · I (S) $12408
- · Z (S) $16550
1910.147 C04 II B
- Issued
- Feb 23, 2026
- Abate by
- Mar 23, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: a) At 2500 Gulf States Pkwy, Moundville, AL 35474, on or about October 18, 2025, in the sawmill, energy control procedures utilized for employees performing maintenance on the sorter did not clearly and specifically outline the procedural steps for isolating, blocking and securing machines or equipment to control all sources of hazardous energy such as gravitational energy.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 321113)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348559204.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.