Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROSALES BROTHERS FRAMING, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROSALES BROTHERS FRAMING, LLC in 8525 U.S. HIGHWAY 11, SPRINGVILLE, AL 35146 (NAICS 238130). OSHA activity number 348597881.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rosales Brothers Framing, LLC — free Get an email when a new federal OSHA severe-injury report for Rosales Brothers Framing, LLC is published. One employer, no account, unsubscribe in one click.
Site address
8525 U.S. HIGHWAY 11
City
SPRINGVILLE
State
AL
ZIP
35146
Mailing
103 BEAVER POND TRL, QUINTON, AL 35130
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1903.19 D01

Other-than-serious 1 instance 5 exposed
Issued
Apr 16, 2026
Abate by
May 21, 2026
Penalty
Initial $319 · Current $319
29 CFR  1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:  (a) On or about 04/16/2026, the employer failed to submit documentation and certification of corrective action for citation #1, item #2b issued on March 02, 2026 with an abatement due date of March 26, 2026.
Recent events (1)
  • — Z (O) $319

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 2, 2026
Penalty
Initial $2,894 · Current $2,894
29 CFR  1926.102(a)(1): Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:   (a) On or about 11/18/2025, at 8525 U.S. Highway 11, Springville, AL; the employer did not ensure eye protection was used by an employee operating a pneumatic nailer.
Recent events (1)
  • — Z (S) $2894

1926.501 B10

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 2, 2026
Penalty
Initial $3,972 · Current $3,972
29 CFR  1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:   (a) On or about 11/18/2025, at 8525 U.S. Highway 11, Springville, AL; employee(s) engaged in framing activities on a commercial roof were not utilizing fall protection.
Recent events (1)
  • — Z (S) $3972

1926.503 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Mar 2, 2026
Abate by
Mar 26, 2026
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about 11/18/2025, at 8525 U.S. Highway 11, Springville, AL; employee(s) engaged in framing activities on a commercial roof had not been trained.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348597881.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.