Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ECO RECOVERY SOLUTIONS LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ECO RECOVERY SOLUTIONS LLC in 200 TECHNOLOGY PARK DRIVE, PUTNAM, CT 06260 (NAICS 423930). OSHA activity number 348605858.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ECO Recovery Solutions LLC — free Get an email when a new federal OSHA severe-injury report for ECO Recovery Solutions LLC is published. One employer, no account, unsubscribe in one click.
Site address
200 TECHNOLOGY PARK DRIVE
City
PUTNAM
State
CT
ZIP
06260
Mailing
200 TECHNOLOGY PARK DRIVE, PUTNAM, CT 06260
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
13
Ownership type
A

4 citations on file for this inspection.

1910.37 A03

Serious Gravity 1 1 instance 4 exposed
Issued
Jan 28, 2026
Abate by
Mar 17, 2026
Penalty
Initial $3,376 · Current $2,025 Reduced
29 CFR  1910.37(a)(3):  Exit route(s) were not kept free and unobstructed:  Palla Mill Conex Box:  On, or about, October 27, 2025, the single entrance/egress door was not accessible at all times.  An electrical component failed in the 480 volt motor control center enclosure, which caused an explosion and smoke.  An employee had to pass the area to use the only exit door that was provided for the workspace.
Recent events (2)
  • — I (S) $2025
  • — Z (S) $3376

1910.303 G01 I A

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 28, 2026
Penalty
Initial $3,376 · Current $2,025 Reduced
29 CFR  1910.303(g)(1)(i)(A):  For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the depth of the working space in the direction of access to live parts (as measured from the live parts where they were exposed or from the enclosure front or opening where they were enclosed) was less than indicated in Table S-1 of Subpart S of Part 1910:  Palla Mill Conex Box:  On, or about, November 7, 2025, a work table was located on the wall opposite from the Allen Bradely 480 volt machine control enclosure.  The table was measured to be 37 inches from the face of the enclosure.
Recent events (2)
  • — I (S) $2025
  • — Z (S) $3376

1910.303 G01 I B

Serious Gravity 1 1 instance 4 exposed
Issued
Jan 28, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.303(g)(1)(i)(B):  For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of the working space in front of electrical equipment was less than the width of the equipment or 762 mm (30 inches), whichever was greater :  Palla Mill Conex Box:  On, or about, November 7, 2025, adequate working space was not provided for the 480 volt Eaton fused disconnect that was located between the entrance door and the transformer.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 G01 II

Serious Gravity 1 1 instance 4 exposed
Issued
Jan 28, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.303(g)(1)(ii):  The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage:  Palla Mill Conex Box:  On, or about, November 7, 2025, skids of parts and other miscellaneous items were stored in front of the Eaton electrical disconnect labeled "DS-PX81".
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View ECO Recovery Solutions LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348605858.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.