OSHA Inspection: A.G. CONTRACTORS CORP.

Issued

May 15, 2026

Abate by

Jun 11, 2026

Penalty

Initial $5,788 · Current $5,788

General-duty citation text

29 CFR  1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  a) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, the employer did not ensure that safety data sheets were readily accessible during each work shift to employees when they were in their work areas for employees exposed to hazardous chemicals while repairing balconies including, but not limited to, respirable crystalline silica dust, SikaGrout 110 AN, and Sikafloor 510 LPL.

Issued

May 15, 2026

Abate by

Jun 11, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59)  a) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, employees who worked with hazardous chemicals were not effectively trained and informed, as evidenced, among other conditions, by employees' lack of knowledge of the availability and location of Safety Data Sheets and of the hazards presented by the chemicals used, including, but not limited to, respirable crystalline silica dust, SikaGrout 110 AN, and Sikafloor 510 LPL.

Issued

May 15, 2026

Abate by

Jun 11, 2026

Penalty

Initial $7,236 · Current $7,236

General-duty citation text

29 CFR  1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.   a) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, an employee was exposed to a struck by hazard while using a BOSCH grinder (Model No. GWS13-50PD) without a guard to cut concrete during restoration work.  b) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, employees were exposed to a struck by hazard while using a BOSCH grinder (Model No. GWS13-50PD) without a guard to grind concrete during restoration work.

Issued

May 15, 2026

Abate by

Jun 11, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (Construction Reference 1926.103)  a) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, the employer did not develop and implement a written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures for employees exposed to respirable crystalline silica dust who are required to wear Milwaukee N95 tight-fitting respirators while grinding concrete.

Issued

May 15, 2026

Abate by

Jun 11, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (Construction Reference 1926.103)  a) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, the employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace for employees exposed to respirable crystalline silica dust who are required to wear Milwaukee N95 tight-fitting respirators while grinding concrete.

Issued

May 15, 2026

Abate by

Jun 11, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested whenever a different respirator facepiece (size, style, model or make) was used: (Construction Reference 1926.103)   a) On or about November 25, 2025, at the Jobsite located at 231 174th Street, Sunny Isles Beach, the employer did not provide fit testing for employees using tight-fitting facepiece respirators prior to initial use of the respirator for employees exposed to respirable crystalline silica dust who are required to wear Milwaukee N95 tight-fitting respirators while grinding concrete.