OSHA Inspection: ENCLOSURE INDUSTRIES LLC

Issued

Apr 17, 2026

Abate by

Aug 3, 2026

Penalty

Initial $2,837 · Current $1,500 Reduced

Hazardous substances 06891520

General-duty citation text

29 CFR  1910.134(c)(2)(ii):The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user:   (a) On or about January 7, 2026, and at times prior, for employees were  exposed to respiratory hazards while welding and wearing a 3m Speedglas Adflow powered air purifying respirator at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Abate by

Aug 3, 2026

Penalty

Initial $3,547 · Current $1,800 Reduced

Hazardous substances 06891520

General-duty citation text

29 CFR  1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form:   (a) On or about January 7, 2026, and at times prior, for employees were exposed to respiratory hazards while welding and wearing a 3m Speedglas Adflow powered air purifying respirator at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Abate by

Aug 3, 2026

Penalty

Initial $0 · Current $0

Hazardous substances 0689

General-duty citation text

29 CFR  1910.1026(d)(1):The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI):  (a) On or about January 7, 2026, and at times prior, for employees were exposed to respiratory hazards while welding and wearing a 3m Speedglas Adflow powered air purifying respirator at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Abate by

Aug 3, 2026

Penalty

Initial $3,547 · Current $1,800 Reduced

General-duty citation text

29 CFR  1910.147(c)(1): The employer did not establish a program consisting of  energy control procedures, employee training, verification and monitoring of de-energized equipment, and periodic inspections before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (a) On or about December 11, 2025, and at times prior, for employees exposed to crushing hazards while changing the dies of the Ermak Speed-Bend press brake at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Abate by

May 8, 2026

Penalty

Initial $4,965 · Current $2,700 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) On or about December 11, 2025, and at times prior, for employees exposed to the crushing  hazards of an Ermak Speed-Bend press brake at or near N619 Wisconsin 67 in Ashippun, Wisconsin.  (b) On or about December 11, 2025, and at times prior, for employees exposed to the crushing hazards of a Fasti Swivel Bending Machine at or near N619 Wisconsin 67 in Ashippun, Wisconsin.  (c) On or about December 11, 2025, and at times prior, for employees exposed to ingoing nip points of a Gardner Machine Co. 3DB belt sander at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Abate by

May 1, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.243(a)(3): Portable belt sanding machine(s) were not guarded at each nip point where the sanding belt runs onto the pulley(s):  (a) On or about, January 7, 2026, and at times prior, for employees exposed to the ingoing nip points of Stephen Bader portable sanders at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Penalty

Initial $4,256 · Current $2,200 Reduced

Hazardous substances 8370

General-duty citation text

29 CFR  1910.252(b)(2)(iii):Workers and other persons adjacent to the welding area were not required to wear appropriate goggles, to protect them from the rays when noncombustible or flameproof screens or shields were not used:  (a) On or about December 11, 2025 and at times prior, for employees who were exposed to ultraviolet radiation hazards while working adjacent to fellow welders in absence of welding screens or appropriate eye protection at or near N619 Wisconsin 67 in Ashippun, Wisconsin.

Issued

Apr 17, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.303(a):29 CFR 1910.303(a): The conductors and/or equipment required or permitted by this subpart were not approved:  (a) On or about December 11, 2025, and at times prior for employees who were exposed to electrical hazards resulting from a shop made extension cord that was not certified, listed, labeled or otherwise determined to be safe by a nationally recognized testing laboratory (NRTL), at or near N619 Wisconsin 67 in Ashippun, Wisconsin.