Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SPK BUILDERS INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SPK BUILDERS INC. in 1212 N DUNTON RD., ARLINGTON HEIGHTS, IL 60004 (NAICS 238170). OSHA activity number 348654476.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch SPK Builders INC. — free Get an email when a new federal OSHA severe-injury report for SPK Builders INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SPK BUILDERS INC.
Site address
1212 N DUNTON RD.
City
ARLINGTON HEIGHTS
State
IL
ZIP
60004
Mailing
1380 OAKWOOD AVE. APT 503, DES PLAINES, IL 60016
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238170
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 21, 2026
Abate by
Mar 10, 2026
Penalty
Initial $2,838 · Current $1,419 Reduced
29 CFR  1926.100(a):  Employees were not provided protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:  a) On December 19, 2025, employees working below employees performing siding work exposed to struck-by hazards in that they were not wearing hard hats.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1419
  • — Z (S) $2838

1926.102 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 21, 2026
Abate by
Mar 10, 2026
Penalty
Initial $2,838 · Current $1,419 Reduced
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:  a) On December 19, 2025, employees were exposed to eye injury while utilizing pneumatic nail guns and a corded DeWalt angle grinder when performing siding work.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1419
  • — Z (S) $2838

1926.300 B01

Serious Gravity 5 2 instances 1 exposed
Issued
Jan 21, 2026
Abate by
Mar 10, 2026
Penalty
Initial $2,838 · Current $1,419 Reduced
29 CFR  1926.300(b)(1):  Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  a) On or about December 19, 2025, an employee was using unguarded DeWalt grinders to perform siding work.  b) On or about December 19, 2025, an employee was using a Rigid miter saw to perform siding work with the guard disabled and not in use.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1419
  • — Z (S) $2838

1926.304 I01

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 21, 2026
Abate by
Mar 10, 2026
Penalty
Initial $0 · Current $0
29 CFR  1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut:  a)  On or about December 19, 2025, the employer provided for employee use a Rockwell Model 10 contractors table saw that was not equipped with a blade guard to rip siding materials.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 21, 2026
Abate by
Mar 10, 2026
Penalty
Initial $2,838 · Current $1,419 Reduced
29 CFR  1926.451(e)(1):  Safe access was not provided to scaffold platforms when the platforms were more than 2 feet above or below the point of access:  a) On December 19, 2025, employees were performing siding work from a ladder jack scaffolding platform approximately 18.8 feet above the ground and were not provided safe means of access and egress.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1419
  • — Z (S) $2838

1926.451 G01 I

Serious Gravity 10 1 instance 2 exposed
Issued
Jan 21, 2026
Abate by
Mar 10, 2026
Penalty
Initial $3,972 · Current $1,986 Reduced
29 CFR  1926.451(g)(1)(i): Each employee on a boatswain's chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold, was not protected by a personal fall arrest system:    a)  On December 19, 2025, employees were exposed to falling approximately 18.8 feet from a ladder jack scaffold.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records
Recent events (2)
  • — I (S) $1986
  • — Z (S) $3972

View SPK Builders INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348654476.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.