WICHITA, KS —
OSHA Inspection: SB MANUFACTURING, INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SB MANUFACTURING, INC in 3707 W MCCORMICK ST, WICHITA, KS 67213 (NAICS 423830). OSHA activity number 348656232.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SB MANUFACTURING, INC
- Site address
- 3707 W MCCORMICK ST
- City
- WICHITA
- State
- KS
- ZIP
- 67213
- Mailing
- 3707 W MCCORMICK ST, WICHITA, KS 67213
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423830
- Employees
- 48
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.107 G02
- Issued
- Mar 11, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $6,620 · Current $3,972 Reduced
General-duty citation text
29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary: At the old and new spray paint booths, spray-painter employees are exposed to fire hazards. Accumulation of combustible residues of spray painting, hardener and primer were observed in the interiors of the booth. Cleaning is not conducted as necessary. According to the safety data sheet of the Sherwin Williams yellow paint, hardener and primer are flammable liquids and vapors.
Recent events (2)
- — I (S) $3972
- — Z (S) $6620
1910.134 E01
- Issued
- Mar 11, 2026
- Abate by
- Apr 21, 2026
- Penalty
- Initial $6,620 · Current $3,972 Reduced
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: At the old and new paint booths, employees are exposed to pulmonary hazards and/or cardiac stress hazards when using required respirators without having been provided a medical evaluation prior to use. The employer requires spray-painters employees to wear 3M full-face filtering respirators when spray painting and have not been medical evaluated. No medical evaluation records were provided.
Recent events (2)
- — I (S) $3972
- — Z (S) $6620
1910.134 F02
- Issued
- Mar 11, 2026
- Abate by
- Apr 21, 2026
- Penalty
- Initial $6,620 · Current $3,972 Reduced
General-duty citation text
29 CFR 1910.134(f)(2):Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: At the old and new paint booths, employees are exposed to respiratory health hazards. Spray painters are required to use a tight-fitting, filtering facepiece respirator, to include a 3M full-face respirator and no annual fit testing has been conducted.
Recent events (2)
- — I (S) $3972
- — Z (S) $6620
1910.107 B09
- Issued
- Mar 11, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(9):A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction: At the old spray paint booth, employees are exposed to fire hazards. The south wall of the old paint booth does not have a clear space of 3 feet. Storage material are kept right next to it, and is not readily accessible for employees to clean.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 M02 I
- Issued
- Mar 11, 2026
- Abate by
- Apr 21, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(m)(2)(i): The employer did not establish a record of the qualitative and quantitative fit tests administered to an employee which included the information required by 29 CFR 1910.134(m)(2)(i)(A) through (m)(2)(i)(E): At the old and new paint booths, employees are required to use 3M full-face respirator and no fit testing records were maintained and provided.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F06 II
- Issued
- Mar 11, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical. Employees in the production, pre-assembly and spray painting booth areas were exposed to chemical hazards when using unlabeled chemical containers: 1) An unlabeled spray bottle containing Windex was observed at the production area. According to the safety data sheet, it causes serious eye irritation. 2) Four unlabeled spray bottles containing either, soap and water, water and WD-40 and an unlabeled gallon containing motor oil was observed at the pre-assembly area. According to the safety data sheets, WD-40 is an extremely flammable aerosol, may be fatal if swallowed and enters airways and may cause drowsiness or dizziness. 3) One unlabeled metallic container with methyl ethyl ketone (MEK) was observed at the old paint booth. According to the safety data sheet, it is highly flammable liquid and vapor, causes serious eye irritation and may cause dizziness or drowsiness.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H03
- Issued
- Mar 11, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3):The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv): Employees in the production, pre-assembly and spray painting booth areas were exposed to chemical hazards when using chemicals such as but not limited to: Sherwin William yellow paint, hardener, primer, gloss, WD-40 and motor oil. According to the safety data sheets, these can cause serious eye irritation, have high flammability, drowsiness and/or dizziness. Employees did not demonstrate knowledge of the location of the safety data sheets in the facility and the chemical container labeling requirements.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at SB Manufacturing, INC
View SB Manufacturing, INC's full OSHA safety record →
More inspections in this industry (NAICS 423830)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348656232.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.