HIALEAH, FL —
OSHA Inspection: IDEA WOOD CORP
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of IDEA WOOD CORP in 2501 WEST 6TH LANE, HIALEAH, FL 33010 (NAICS 337110). OSHA activity number 348658337.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IDEA WOOD CORP
- Site address
- 2501 WEST 6TH LANE
- City
- HIALEAH
- State
- FL
- ZIP
- 33010
- Mailing
- 2501 WEST 6TH LANE, HIALEAH, FL 33010
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Mar 25, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $2,838 · Current $1,987 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) On or about December 22, 2025, and days prior, at 2501 West 6th Lane Hialeah, FL 33010 the employer did not ensure the sliding table saw (MJ-45 Precision Panel Saw, Model MJ6132) was guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut, thus exposing employees to amputation hazards.
Recent events (2)
- — I (S) $1986.6
- — Z (S) $2838
1910.213 C02
- Issued
- Mar 25, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $2,838 · Current $1,987 Reduced
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: (a) On or about December 22, 2025, and days prior, at 2501 West 6th Lane Hialeah, FL 33010, employees were exposed to an amputation hazard when using a table saw that was not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator.
Recent events (2)
- — I (S) $1986.6
- — Z (S) $2838
1910.213 C03
- Issued
- Mar 25, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) On or about December 22, 2025, and days prior, at 2501 West 6th Lane Hialeah, FL 33010, employees were exposed to an amputation hazard when using a table saw that did not have a kickback device so located to prevent the saw from picking up the material or to throw it back toward the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 M05 I
- Issued
- Mar 25, 2026
- Abate by
- Apr 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, and brakes set. (a) On or about December 22, 2025, at 2501 West 6th Lane, Hialeah, FL 33010, the employer did not ensure that the key of the powered industrial truck were removed and the load engaging means were fully lowered when left unattended, exposing employees to stuck by and crushing hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348658337.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.