MOUNT OLIVE, IL —
OSHA Inspection: THE MENNEL MILLING COMPANY OF ILLINOIS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of THE MENNEL MILLING COMPANY OF ILLINOIS in 415 EAST MAIN STREET, MOUNT OLIVE, IL 62069 (NAICS 311211). OSHA activity number 348663386.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE MENNEL MILLING COMPANY OF ILLINOIS
- Site address
- 415 EAST MAIN STREET
- City
- MOUNT OLIVE
- State
- IL
- ZIP
- 62069
- Mailing
- P.O. BOX 255, MOUNT OLIVE, IL 62069
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311211
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 23, 2026
- Abate by
- Apr 3, 2026
- Penalty
- Initial $3,547 · Current $2,660 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about November 21, 2025, procedures were not developed, and documented, for the control of hazardous energy during service work conducted on a TP airlock blade, Kice Industries (Airlock), Serial Number 165380C270009, Model Number VJ10X8X8, located on the northwest side of the 2nd Floor Clean House.
Recent events (2)
- — I (S) $2660
- — Z (S) $3547
1910.147 C06 I
- Issued
- Feb 23, 2026
- Abate by
- Apr 3, 2026
- Penalty
- Initial $3,547 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about November 21, 2025, the employer did not conduct a periodic inspection(s) of the "General Hazardous Energy Control Procedure", utilized for energy isolation on equipment such as but not limited to TP Airlock systems, to ensure that requirements of this standard were being followed.
Recent events (2)
- — I (S) $0
- — Z (S) $3547
1910.147 D
- Issued
- Feb 23, 2026
- Abate by
- Apr 3, 2026
- Penalty
- Initial $3,547 · Current $2,660 Reduced
General-duty citation text
29 CFR 1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about November 21, 2025, energy isolating actions and controls were not applied per the employer's general procedures regarding clean out of foreign material from a Kice Industries, Inc Rotary Airlock, VJX Series, Serial Number 165380C270009, Model Number VJ10X8X8, located on the northwest side of the receiving room.
Recent events (2)
- — I (S) $2660
- — Z (S) $3547
More inspections at The Mennel Milling Company of Illinois
View The Mennel Milling Company of Illinois's full OSHA safety record →
More inspections in this industry (NAICS 311211)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348663386.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.