Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: ADVANCED FIBER, LLC

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of ADVANCED FIBER, LLC in 100 CROSSROADS BLVD., BUCYRUS, OH 44820 (NAICS 325220). OSHA activity number 348677097.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Advanced Fiber, LLC for free Get an email when a new federal OSHA severe-injury report for Advanced Fiber, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
ADVANCED FIBER, LLC
Site address
100 CROSSROADS BLVD.
City
BUCYRUS
State
OH
ZIP
44820
Mailing
100 CROSSROADS BLVD., BUCYRUS, OH 44820
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Last modified
Data loaded
NAICS code
325220
Employees
47
Ownership type
Private (A)

4 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 27 exposed
Issued
May 19, 2026
Abate by
Jun 12, 2026
Penalty
Initial $8,276 · Current $8,276

Hazardous substances 9135

29 CFR  1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition.  On or about January 8, 2026, and at times thereafter, the employer did not keep all places of employment, passageways, storerooms, and walking working surfaces in a clean, orderly and sanitary condition. Accumulations of paper pieces, paper particulate, and other material were present on walking-working surfaces, walls, equipment, duct work, electrical boxes, pipes, horizontal structural I-beams, steel cross-bracings, on top of the QC testing room and other elevated surfaces. Employees were exposed to potential fire hazards from the accumulations of combustible materials.
Recent events (2)
  • · C (S) $8276
  • · Z (S) $8276

1910.134 A02

Serious Gravity 5 1 instance 4 exposed
Issued
May 19, 2026
Abate by
Jul 7, 2026
Penalty
Initial $9,931 · Current $9,931

Hazardous substances 9135

29 CFR  1910.134(a)(2): A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee:  On or about February 24, 2026, the employer had not provided an employee working in the back loading area of the production line performing tasks such as mixing paper goods and loading paper goods onto the paper table with a respirator for protection against particulates not otherwise regulated- total dust. The employee was exposed to an 8-hour time weighted average (TWA) of 24.4 mg/m3 of total dust, approximately 1.63 times the permissible exposure limit (PEL) of 15 mg/m3 without the use of respiratory protection.
Recent events (2)
  • · C (S) $9931
  • · Z (S) $9931

1910.1000 A02

Serious Gravity 5 1 instance 4 exposed
Issued
May 19, 2026
Abate by
Sep 30, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR  1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Particulates Not Otherwise Regulated (Total Dust) listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of 15 mg/m3:  On or about February 24, 2026, an employee working in the back loading area of the production line was exposed to an 8-hour time weighted average (TWA) of 24.4 mg/m3 of total dust, approximately 1.63 times the permissible exposure limit (PEL) of 15 mg/m3 while performing tasks such as mixing paper goods and loading paper goods onto the paper table. The exposure was derived from a personal sample collected over a 463 minute sampling period, with zero exposure assumed for the unsampled period of 17 minutes.
Recent events (2)
  • · C (S) $0
  • · Z (S) $0

1910.1000 E

Serious Gravity 5 1 instance 4 exposed
Issued
May 19, 2026
Abate by
Sep 30, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR  1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d):  On or about February 24, 2026, the employer did not implement engineering and work practice controls to reduce and maintain exposure to total dust to or below the PEL in the back loading area of the production line while employees performed tasks such as mixing paper goods and loading paper goods onto the paper table. An employee was exposed to an 8-hour time weighted average (TWA) of 24.4 mg/m3 of total dust, approximately 1.63 times the permissible exposure limit (PEL) of 15 mg/m3.
Recent events (2)
  • · C (S) $0
  • · Z (S) $0

View Advanced Fiber, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348677097.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.