BUENA, NJ —
OSHA Inspection: CBP INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of CBP INC. in 701 SOUTH HARDING HIGHWAY, BUENA, NJ 08310 (NAICS 321918). OSHA activity number 348678905.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CBP INC.
- Site address
- 701 SOUTH HARDING HIGHWAY
- City
- BUENA
- State
- NJ
- ZIP
- 08310
- Mailing
- 701 SOUTH HARDING HIGHWAY, BUENA, NJ 08310
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 26
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- May 11, 2026
- Abate by
- Jun 5, 2026
- Penalty
- Initial $4,965 · Current $3,300 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. a) Production area: Employees were exposed to lacerations while operating a SawStop table saw due to the unguarded rotating blade. On or about 01/09/26. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY W ILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $3300
- — Z (S) $4965
1910.303 B02
- Issued
- May 11, 2026
- Abate by
- Jul 6, 2026
- Penalty
- Initial $6,620 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Middle of the production area , close proximity to CNC machine and a the enclosed dust collector: The employer installed a cover on the electrical panel that was not designed according to the manufacturer's specifications and does not keep the door effectively closed. On or about 01/09/26 NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY W ILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $4000
- — Z (S) $6620
1910.303 B07 I
- Issued
- May 11, 2026
- Abate by
- Jul 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment: a) Middle of the production area , close proximity to CNC machine and a the enclosed dust collector : The main disconnect switch on the electrical panel was not installed. On or about 01/09/26. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY W ILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 F02
- Issued
- May 11, 2026
- Abate by
- Jul 6, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) Middle of the production area , close proximity to CNC machine and a the enclosed dust collector: The employer failed to ensure all breakers in the electrical panel were properly labeled to indicate its nature, use, and purpose. On or about 01/09/26. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY W ILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at CBP INC.
View CBP INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348678905.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.