1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: D & D POWER

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of D & D POWER in 4828 SINCLAIR ROAD, SAN ANTONIO, TX 78222 (NAICS 532490). OSHA activity number 348680679.

Establishment
D & D POWER
Site address
4828 SINCLAIR ROAD
City
SAN ANTONIO
State
TX
ZIP
78222
Mailing
4828 SINCLAIR ROAD, SAN ANTONIO, TX 78222
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
532490
Employees
9
Ownership type
A

7 citations on file for this inspection.

1910.135 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $5296.00 · Current $3178.00 Reduced
29 CFR  1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects.  On or about January 9, 2026, employees were utilizing the host crane to lift and move equipment and materials without utilizing head protection.
Recent events (2)
  • — I (S) $3177.6
  • — Z (S) $5296

1910.184 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $5296.00 · Current $3178.00 Reduced
29 CFR  1910.184(c)(1): Sling(s) that were damaged or defective were used.  On or about January 9, 2026, employees were utilizing worn and damaged slings to lift equipment and material within the hoist area.
Recent events (2)
  • — I (S) $3177.6
  • — Z (S) $5296

1910.212 B

Serious Gravity 1 2 instances 2 exposed
Issued
Penalty
Initial $3972.00 · Current $2383.00 Reduced
29 CFR  1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving.  On or about January 9, 2026, employees were utilizing a drill press designed for a fixed location and not securely anchored to prevent walking or moving.
Recent events (2)
  • — I (S) $2383.2
  • — Z (S) $3972

1910.215 A04

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3972.00 · Current $2383.00 Reduced
29 CFR  1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work.  On or about January 9, 2026, employees were utilizing a bench grinder without rest supports installed to perform grinding work.
Recent events (2)
  • — I (S) $2383.2
  • — Z (S) $3972

1910.215 B09

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch.  On or about January 9, 2026, and at times prior thereto, employees were utilizing a bench grinder to perform grinding work without the tongue guard exceeding on fourth inch from the abrasive wheel.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $5296.00 · Current $3178.00 Reduced
29 CFR  1910.253(b)(2)(ii): Inside of buildings, cylinders were not stored in a well-protected, well-ventilated, dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil or excelsior.  On or about January 9, 2026, employees stored an oxygen cylinder unsecured, next to a passageway, and near combustible wood material.
Recent events (2)
  • — I (S) $3177.6
  • — Z (S) $5296

1910.305 G01 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $5296.00 · Current $3178.00 Reduced
29 CFR  1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv)(a).  On or about January 9, 2026, employees were utilizing an extension cord as permanent wiring which was ran from the degreaser area through a doorway and behind an unused spray booth.
Recent events (2)
  • — I (S) $3177.6
  • — Z (S) $5296

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348680679.