EAST CANTON, OH —
OSHA Inspection: RHI MAGNESITA
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of RHI MAGNESITA in 6878 OSNABURG ST. SE, EAST CANTON, OH 44730 (NAICS 327120). OSHA activity number 348693656.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RHI MAGNESITA
- Site address
- 6878 OSNABURG ST. SE
- City
- EAST CANTON
- State
- OH
- ZIP
- 44730
- Mailing
- 6878 OSNABURG ST. SE, EAST CANTON, OH 44730
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327120
- Employees
- 58
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 20, 2026
- Penalty
- Initial $12,059 · Current $12,059
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about January 9, 2026, RHI Magnesita DBA Resco Products, Inc. located at 6878 Osnaburg St. SE East Canton, OH 44730, did not ensure machine specific procedures for the BAT Bagging Dust Collector motor (Carolina Blower Corp. Model #406SD Serial #D9398) were utilized prior to service and maintenance of the equipment took place. Maintenance employees conducted service and maintenance on the BAT Bagging Dust Collector motor, while energized exposing the employees to the unexpected energization or startup of the machine.
Recent events (2)
- — I (S) $12059
- — Z (S) $12059
1910.147 C06 I
- Issued
- Feb 20, 2026
- Penalty
- Initial $12,059 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: On or about January 9, 2026, RHI Magnesita DBA Resco Products, Inc. located at 6878 Osnaburg St. SE East Canton, OH 44730, did not ensure periodic inspections of energy control procedures were conducted at least annually, to confirm that the energy control procedures are adequate and properly implemented by authorized employees during servicing and maintenance activities.
Recent events (2)
- — I (S) $0
- — Z (S) $12059
1910.147 C06 I C
- Issued
- Feb 20, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspection: On or about January 9, 2026, RHI Magnesita DBA Resco Products, Inc. located at 6878 Osnaburg St. SE East Canton, OH 44730, did not ensure periodic inspections of energy control program were conducted at least annually, including a review of each authorized employee under the energy control procedures to ensure that all employees are aware of their roles and responsibilities in maintaining safety during servicing and maintenance activities.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Feb 20, 2026
- Penalty
- Initial $12,059 · Current $7,941 Reduced
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about January 9, 2026, RHI Magnesita DBA Resco Products, Inc. located at 6878 Osnaburg St. SE East Canton, OH 44730, did not ensure all pulleys were guarded to protect operators and other employees from amputation and entanglement hazards such as those created by rotating parts on the BAT Bagging Dust Collector motor (Carolina Blower Corp. Model #406SD Serial #D9398 ).
Recent events (2)
- — I (S) $7941
- — Z (S) $12059
More inspections in this industry (NAICS 327120)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348693656.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.