Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARIO FLORES VAZQUEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MARIO FLORES VAZQUEZ in 210 BELLEHURST DRIVE LOT #13, WARRIOR, AL 35180 (NAICS 238130). OSHA activity number 348694266.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mario Flores Vazquez — free Get an email when a new federal OSHA severe-injury report for Mario Flores Vazquez is published. One employer, no account, unsubscribe in one click.
Site address
210 BELLEHURST DRIVE LOT #13
City
WARRIOR
State
AL
ZIP
35180
Mailing
192 COUNTY ROAD 1080, MONTEVALLO, AL 35115
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 25, 2026
Abate by
Apr 20, 2026
Penalty
Initial $5,107 · Current $5,107
29 CFR  1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  (a) On or about January 15, 2026, 210 Bellehurst Drive, Lot #13, Warrior, AL; employee(s) operated pneumatic nail guns without utilizing eye or face protection while performing framing activities on a new single family residential home.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $5107

1926.501 B13

Repeat Gravity 10 1 instance 1 exposed
Issued
Mar 25, 2026
Penalty
Initial $11,916 · Current $11,916
29 CFR  1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m)  or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502:   (a) On or about January 15, 2026, 210 Bellehurst Drive, Lot #13, Warrior, AL; employee(s) operated pneumatic nail guns without utilizing an adequate fall protection system while performing framing activities on the roof of a new single family residential home.  Mario Flores Vazquez was previously cited for a violation of this occupational safety and health standard  29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1812873, citation number 1, item number 1a and was affirmed as a final order on July 02, 2025 with respect to a workplace located at 543 Avondale Lane, Pell City, AL 35128.
Recent events (1)
  • — Z (R) $11916

1926.503 A01

Repeat Gravity 10 1 instance 1 exposed
Issued
Mar 25, 2026
Abate by
Apr 20, 2026
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about January 15, 2026, 210 Bellehurst Drive, Lot #13, Warrior, AL; employee(s) operated pneumatic nail guns without being trained to recognize fall hazards involved with conducting framing activities while forming a single family new residential roof in construction.   Mario Flores Vazquez was previously cited for a violation of this occupational safety and health standard 29 CFR 1926.503(a)(1), which was contained in OSHA inspection number 1812873, citation number 1, item number 1b and was affirmed as a final order on July 02, 2025 with respect to a workplace located at 543 Avondale Lane, Pell City, AL 35128.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (R) $0

View Mario Flores Vazquez's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348694266.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.