OSHA Inspection: ATCO RUBBER PRODUCTS, INC.

Issued

Mar 31, 2026

Abate by

Jun 26, 2026

Penalty

Initial $5,958 · Current $3,900 Reduced

General-duty citation text

29 CFR  1910.178(a)(4):  Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:   a) ATCO RUBBER PRODUCTS, INC.- Raw material storage Area/production area:  Employees were operating the Yale propane forklift Model #GLC050VXNEAE083, S/N C910V13854U, Cat forklift Model #2C4000, S/N AT9043457, Cat forklift Model # 2C4000, S/N AT9047253, Cat forklift  Model 2C4000 S/N A19048099, with forklift attachments to clamp/move big rolls of raw materials.  The attachments did not have any markings and were used without obtaining the forklift manufacturer's written approval for the attachment usage, occurred on or about 01/21/2026.

Issued

Mar 31, 2026

Abate by

Jun 26, 2026

Penalty

Initial $9,931 · Current $6,300 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) ATCO RUBBER PRODUCTS, INC.-  Line 1/Production area:  The top cage on the Ram Packer machine (20 inches - Line 1) was not properly guarded, creating a hazard where employees could hit their heads when the cage lowers while they are extending product to prevent jams, observed on or about 01/21/2026.  b) ATCO RUBBER PRODUCTS, INC - Manufacturing lines 1 to 9:  Employees unloading the rolls of insulation and then threading them through the table/conveyor are exposed to unguarded rolls that help push the flat insulation sheets through the shear, exposing them to pinch points., occurred on or about 01/21/2026.

Issued

Mar 31, 2026

Abate by

Apr 24, 2026

Penalty

Initial $5,958 · Current $3,900 Reduced

General-duty citation text

29 CFR 1910.242(b):  Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.   a) ATCO RUBBER PRODUCTS, INC. -  Manufacturing area:  Employees were using the compressed air set at approximately 80 P.S.I. to clean themselves before going to lunch and before the end of their shift, occurred on or about 01/21/2026.

Issued

Mar 31, 2026

Abate by

Apr 24, 2026

Penalty

Initial $5,958 · Current $3,900 Reduced

General-duty citation text

29 CFR  1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less, were not readily accessible to each employee or authorized building management personnel:  a) ATCO RUBBER PRODUCTS, INC.- Near the raw material storage:  Electrical panels were obstructed by stored material such as insulation  sheets, observed on or about 01/21/2026.  b) ATCO RUBBER PRODUCTS, INC. -In front of the production area:  Electrical panel were obstructed by boxes of material and containers, observed on or about 01/21/2026.

Issued

Mar 31, 2026

Abate by

Jun 26, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a) ATCO RUBBER PRODUCTS, INC. - Throughout the manufacturing area:  Lock Out/Tag Out procedures were not developed for equipment such as, but not limited to;  9 manufacturing lines, the mechanics perform maintenance operations on a daily basis.  Occurred on or about 01/21/2026.

Issued

Mar 31, 2026

Abate by

Jun 26, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) would be met:  a) ATCO RUBBER PRODUCTS, INC. - Throughout the manufacturing facility: The employer did not have a written hazard communication program for employees that handled chemicals such as but not limited to; hydraulic oils, plastic cleaners, glues, oxygen, propane, on or about 01/21/2026.

Issued

Mar 31, 2026

Abate by

Apr 24, 2026

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   a) ATCO RUBBER PRODUCTS, INC. - Throughout the manufacturing facility:  The employer did not provide training to employees that handled chemicals such as but not limited to, hydraulic oils, glue, plastic cleaners, oxygen, and propane, on or about 01/21/2026