LORENA, TX —
OSHA Inspection: ADOLPHO LOPEZ
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ADOLPHO LOPEZ in 11520 THEMIS COURT, LORENA, TX 76655 (NAICS 238140). OSHA activity number 348750258.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADOLPHO LOPEZ
- Site address
- 11520 THEMIS COURT
- City
- LORENA
- State
- TX
- ZIP
- 76655
- Mailing
- 4240 MULBERRY DRIVE, BELTON, TX 76513
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Apr 7, 2026
- Abate by
- May 5, 2026
- Penalty
- Initial $1,702 · Current $1,702
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: On or about February 13, 2026, employees were not provided eye protection when operating a masonry saw to cut bricks.
Recent events (1)
- — Z (S) $1702
1926.300 B01
- Issued
- Apr 7, 2026
- Abate by
- Apr 16, 2026
- Penalty
- Initial $1,702 · Current $1,702
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: On or about February 13, 2026, employees operated a DeWalt masonry saw that had the lower blade guard tied back with rope while cutting concrete stone/brick.
Recent events (1)
- — Z (S) $1702
1926.1153 C01
- Issued
- Apr 7, 2026
- Abate by
- May 5, 2026
- Penalty
- Initial $2,838 · Current $2,838
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer must fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section: On or about February 13, 2026, the employer did not ensure that employees using a masonry saw to cut bricks were protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (1)
- — Z (S) $2838
1926.1153 D02 I
- Issued
- Apr 7, 2026
- Abate by
- Apr 21, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: On or about February 13, 2026, the employer did not assess the exposure to Silica for employees using a stationary masonry saw to cut bricks.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348750258.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.