Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DANIEL MILLER CONSTRUCTION

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of DANIEL MILLER CONSTRUCTION in 4879 LYLE LANE, EAU CLAIRE, WI 54703 (NAICS 238130). OSHA activity number 348750738.

Watch Daniel Miller Construction — free Get an email when a new federal OSHA severe-injury report for Daniel Miller Construction is published. One employer, no account, unsubscribe in one click.
Site address
4879 LYLE LANE
City
EAU CLAIRE
State
WI
ZIP
54703
Mailing
1600 EAST MAIN ST., GILMAN, WI 54433
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $319.00 · Current $319.00
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  (a) Citation 1, Item 1a; a serious violation of 29 CFR 1926.501(b)(1) with an abatement date of March 31, 2026.  (b) Citation 1, Item 1b; a serious violation of 29 CFR 1926.503(a)(1) with an abatement date of March 31, 2026.  (c) Citation 1, Item 1c; a serious violation of 29 CFR 1926.1051(a) with an abatement date of March 31, 2026.
Recent events (1)
  • — Z (O) $319

1903.19 D01

Other-than-serious 3 instances 4 exposed
Issued
Abate by
Penalty
Initial $319.00 · Current $319.00
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:  (a) Citation 1, Item 1a; a serious violation of 29 CFR 1926.501(b)(1) with an abatement date of March 31, 2026.  (b) Citation 1, Item 1b; a serious violation of 29 CFR 1926.503(a)(1) with an abatement date of March 31, 2026.  (c) Citation 1, Item 1c; a serious violation of 29 CFR 1926.1051(a) with an abatement date of March 31, 2026.
Recent events (1)
  • — Z (O) $319

1926.501 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3972.00 · Current $3972.00
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:   (a) Under-construction ladder-frame pole building; On or about February 17, 2026, and dates prior, a means of fall protection was not provided during framing activities for employees who worked from wall top plates, roof trusses, girts, and purlins at approximate heights ranging between 16-feet to 25-feet above ground level.
Recent events (1)
  • — Z (S) $3972

1926.503 A01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   (a) Under-construction ladder-frame pole building; On or about February 17, 2026, and dates prior, employees performing framing activities were not provided with a training program to recognize fall hazards and the procedures to minimize them, while working at approximate heights ranging between 16 feet to 25 feet above ground level.
Recent events (1)
  • — Z (S) $0

1926.1051 A

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1051(a): Stairways or ladders were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist was provided:  (a) Under-construction ladder-frame pole building; On or about February 17, 2026, and dates prior, employees were not provided with a safe means of access to elevated work areas and were required to climb horizontal wall girts and/or bracing members spaced approximately 24 to 30 inches on-center, with heights ranging between 16 feet (girts) to 22 feet (bracing) above ground level.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348750738.