Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: MARISELA SIBAJA HERNANDEZ

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MARISELA SIBAJA HERNANDEZ in 805 AMITY RD, CONWAY, AR 72032 (NAICS 238390). OSHA activity number 348762907.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Marisela Sibaja Hernandez for free Get an email when a new federal OSHA severe-injury report for Marisela Sibaja Hernandez is published. One employer, no account, unsubscribe in one click.
Site address
805 AMITY RD
City
CONWAY
State
AR
ZIP
72032
Mailing
17102 N. ALEXANDER RD LOT 570, ALEXANDER, AR 72002
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238390
Employees
3
Ownership type
Private (A)

5 citations on file for this inspection.

1926.451 A06

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 18, 2026
Penalty
Initial $0 · Current $0
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design:  (a) On or about February 23, 2026, 3rd and 4th floors, at the north exterior staging/loading area, employees were using a job-site built wooden box for transporting materials to elevated areas, which was not designed by a qualified person.
Recent events (1)
  • · Z (S) $0

1926.451 C02 V

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 18, 2026
Penalty
Initial $0 · Current $0
29 CFR  1926.451(c)(2)(v): The employer used forklifts to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied:   (a)On or about February 23, 2026, at the north exterior staging/loading area, employees were relocating materials while operating a telescopic forklift to support a job-site built wooden box that was not secured to its forks.
Recent events (1)
  • · Z (S) $0

1926.451 G01 VII

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 18, 2026
Penalty
Initial $0 · Current $0
29 CFR  1926.451(g)(1)(vii):  Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section:  (a) On or about February 23, 2026, at the north exterior staging/loading area, employees were in a job-site built wooden box at heights greater than 10 feet without fall protection while transporting construction materials.
Recent events (1)
  • · Z (S) $0

1926.602 C01 VIII A

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 18, 2026
Penalty
Initial $0 · Current $0
29 CFR  1926.602(c)(1)(viii)(A): The industrial truck was not equipped with a safety platform/cage firmly secured to the lifting carriage and/or forks when used for lifting personnel:   On or about February 23, 2026, at the north exterior staging/loading area, employees were operating a telescopic forklift while being elevated in a job-site built wooden box that was not secured to the lifting carriage and/or forks.
Recent events (1)
  • · Z (S) $0

1926.602 D

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 18, 2026
Penalty
Initial $0 · Current $0
29 CFR  1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):  On or about February 23, 2026, at the north exterior staging/loading area, employees were transporting materials while operating a telescopic forklift without prior completion of formal instruction, practical training, and evaluation.
Recent events (1)
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348762907.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.